Posts Tagged ‘jaclyn smith’

From Bland White to Captivating Black & Gold Geometric

January 8, 2022
Vanity area before. Note the nice homeowner had the plumber remove the wall-mounted faucet and handle. This made the wallpaper installation so much easier – and eliminated a zillion relief cuts around these objects that might later give entry for splashed water to wick under and loosen the wallpaper.
Done. I centered the pattern on the wall so it hits both corners equally, and it falls perfectly around the faucet (no photo). The light fixture was hung a tad off-center.
Burnished gold accents of the light fixture, faucet (to be installed later), and toilet paper holder, as well as a gold-painted ceiling, compliment the gold lines in the pattern, and really pull this room together.
This non-woven paste-the-wall material is made by Trend, and is in the Jaclyn Smith collection. It has a slightly textured surface, and appears to be vinyl on the surface. This makes is more durable and stain-resistant than most paper wallpapers. It is thin and flexible, and I liked it a lot.
The home is a contemporary new-build in the Lindale Park neighborhood of central Houston.

Manufacturer Can’t Print Straight

January 8, 2022

Some bolts / rolls of this Jaclyn Smith by Trend wallpaper came with a 1/8″ bit of pattern on the right edge.
But other bolts had differing amounts. This one had barely anything.
So what’s the problem? Butting one strip up against another on the wall might result in a slight pattern mis-match. The spacing between the vertical stripes might be off, which could catch the eye. But also the gold diagonal stripes might not match up – and that would most definitely be visible.

Soft Geometric Accent Wall in Mother In Law’s Suite

October 22, 2021
Headboard accent wall before. Textured wall was skim-floated and sanded smooth, then primed. Now it’s ready for wallpaper.
Finished.
Closer look.
Detail. The seams were invisible. The lines on this paper are raised a bit, so there is a 3-D effect.
I hung this non-woven wallpaper by the paste-the-wall method. Here I have rolled the strips backward, to prevent the decorative surface from hitting the paste on the wall. When I’m at the top of my ladder, I will take off the elastic hairband and let the paper unfurl down to the floor. It’s rolled so the top of the strip comes off first.
I have measured the wall and noted where the center point is, then determined where I want my first strip to fall. The black box in the foreground is my laser level, and you can see the vertical red line it’s shooting at the wall, which is where I am going to line up my first strip.
Positioning the wallpaper strip along the vertical laser line.
This muted geometric pattern is in the Jaclyn Smith Home line by the Trend division of Fabricut. It was mighty nice to work with, and will hold up for years until the family is ready for a change of decor. Then, the polyester-content non-woven material is designed to strip off the wall easily and in one piece.

The home is in the Memorial Villages neighborhood of Houston.