Woeful Walls

The walls in this powder room have a sort of sad and even hopeless feel about them.
It’s hard to put my finger on exactly why.

The bottom edge where the wall meets the baseboard looks uneven and unstable, with and odd lip running along the top of the baseboard.

And a lot of it has to do with the dull color, and the thick layer of gummy latex paint. The gloss finish adds to the tacky look.
It also doesn’t help that there is a lot of lint and other stuff stuck in the paint, creating a gritty and uneven wall surface.
Oh, and the texture that was rolled on is irregular and icky.

There was a lot of globby stuff – caulk and some loose edges – along the edge of this vanity. I took a razor and putty knife and dug out what I could.
And note the ridge along the top of the baseboard. Can’t expect wallpaper to grab ahold and adhere to that.

Likewise there was a lot of caulk along the top of the vanity backsplash. I dug out what I could of that, too.
And finally I figured out what was causing a large part of the problem … The room had been wallpapered previously. So when it was decided to paint the room, instead of stripping off the paper as they should have, they just painted over it. To me, it looks like there are several layers of thick latex paint on top of the wallpaper.

Yep. Sure enough! Along the electrical outlet you can clearly see the old wallpaper under all this mess.
As you can see, the latex paint is not adhering tightly to the old wallpaper. The wallpaper looks like it could be vinyl … and not much sticks well to vinyl. Think Colorforms.
Stripping off all this paint and the wallpaper under it would make a HUGE mess. So, short of re-drywalling the whole room (and the rest of the house, which has the same treatment), there’s not much that can be done to ensure that the layers inside this wall are stable.
I dug out caulk and pulled off any loose areas. Then I skim-floated the whole room to create a new, smooth layer on top. I’ll post more when that process is finished and the new wallpaper is up.

Mirror Tar Bleeds Through Wallpaper – Prevention

The owner of this newish home in the Woodland Heights (Houston) had her handyman remove the powder room mirror and its surrounding built-in wooden frame. Mirrors are often adhered to the wall with mastic, a tar-like substance. When the mirror comes off, some of the tar residue invariably remains.

In the top photo, you can see where removing the mirror took the blobs of mastic along with it, as well as round sections of the drywall. But there are small smudges of tar still remaining on the wall.

The problem is that tar (among a lot of other substances) will bleed through wallpaper (as well as paint, and a lot of other materials).

There are stain blockers like my beloved KILZ Original Oil Based, BIN shellac based, or others, that are designed to block these stains. But I don’t trust them. For water, rust, blood, wood sap, etc., yes. But for oil-based substances like tar, I want more assurance. The best way to prevent bleed-through is not to cover the stain, but to remove it.

So I take a Stanley knife and cut into the drywall and then peel up the top layer of drywall, taking along the offending tar residue.

So now the dangerous tar is gone. But you’re left with torn drywall. This is bad for several reasons. For one thing, you have an uneven surface that will look bad under the new wallpaper (or paint). And since the top, protective layer of drywall is gone, any moisture (such as from wallpaper paste or from latex paint) will penetrate into the torn paper layer – which will swell and cause bubbling.

All of which looks pretty bad under wallpaper or paint.

So I used the product Gardz to seal the torn drywall. It is formulated to soak into the paper; then it dries hard and acts as a sealer and moisture-blocker. It won’t block stains, but it will prevent moisture from penetrating the paper and causing bubbling.

Once that was dry, I skim-floated over the entire area with joint compound. It looks rough in the photo, but once it’s dry, I’ll sand it smooth. Then I’ll give it another coat of the penetrating sealer Gardz. See last photo. Once that is dry, I’ll cover it with a coat of Roman’s Ultra Prime Pro 977 wallpaper primer, when I prime the other walls in this powder room.

All of these various products do take a while to dry, especially the joint compound as thick as I applied it. So I went to this job site a few days before the install date, to do the initial prep, so it would have plenty of time to dry before I come back for the final prep and wallpaper hang.