Posts Tagged ‘layout’

Geometric Grasscloth in Home Gathering Area

June 29, 2022
No, this large room with sink and counters isn’t a kitchen. The family loves to entertain both family and friends, so included this “bonus” room in their new home’s plans. It’s used for both entertaining and crafting.
The wall facing you was originally painted a semi-gloss navy blue. In the photo, I’ve applied my wallpaper primer.
It will adhere to the glossy paint, and provide a matt finish for the wallpaper paste to grab ahold of.
Taking measurements and plotting the layout.
This paper has a selvedge edge , which has to be trimmed off by hand with a straightedge and razor blade. The manufacturer has not provided trim guide marks , so I am using a ruler and my eye.
The new look is so dramatically different I couldn’t resist taking a photo mid-hang. As you can see, I’ve used dark paint to stripe under where the seams will fall, to prevent any of my primer from showing through at the seams.
You can see the ceiling line starting to track upward on the right portion. More on that below.
Finished. Perfectly centered.
This is the mounting hardware for the big screen TV . I asked them to remove the TV, but we left the mounts in place. In order to support the heavy TV, they are placed quite securely into the wall , and I feel it’s best not to jimmy around with that.
Rather than have the first strip straddle the TV mount, I plotted to have my first seam fall down the middle of the wall, placing a seam in the mid point of the mount. This meant I had to hang four strips instead of three, but it made it a whole lot easier to work around the TV mount, as well as to keep the left and right edges of the grasscloth straight and plumb.
Close up showing the texture of this grasscloth material. It’s atypical to have grass cloth printed with a pattern , and I rather like the way the ink looks somewhat scratchy against the rough background.
Because it’s Schumacher, you can expect printing defects . The slight pattern match doesn’t bother me, as there were many more places along each strip that matched up perfectly. Nor do I mind the different intensity of ink on the two strips. That’s all part of the look of grasscloth.
But I wasn’t pleased with the white ink out in the middle of nowhere, as seen about 1//3 down the center of the picture. This isn’t considered a defect , and from a distance it’s not really noticeable. But it bugged me.
So I used some water-based paint and a very small brush from the craft store and lightly touched up the spots.
I also softened the mis-matched edges a bit. There’s a fine line between covering the white spots and staining the material, so use a light hand. And never permanent ink or oil-based markers or pastels.
Likewise, the ceiling line was not level, so as I moved from the mid-point out to the right, the ceiling rose above the geometric motif’s top edge, and a white line began to be visible, but only to the right of the centerpoint.
So I used the black paint to cover up that extra bit of white. This increases the width of that horizontal navy blue line from 1/4″ to about 1/2″. But from down on the floor you can’t tell, and it looks a whole lot better than having white on the right side and none on the left.
The brand is Schumacher and the home is in the Garden Oaks / Oak Forest area of Houston.
The interior designer who came up with this bold and lively look is Clayton Brooks .

Minimalizing Color Variations by Hanging in Sequence

May 13, 2018


Because grasscloth is a natural fiber product, it is known for certain inherent features, namely a pattern that cannot be matched, visible seams, and color variations such as paneling (one strip is a slightly different color from the one next to it), shading (different colors within the same strip), and edges that are lighter in color than the center of the strip. Just do a Search here to see pictures and read stories.

This manufacturer (Thibaut) has taken steps to minimize one of these issues. First, you want to be sure that all your bolts were printed at the same time, from the same run or dye lot (see label). Next, when a whole lot of wallpaper is printed at one time, the ink color can change ever so slightly from the beginning of a run to the end.

So Thibaut lists not only the run number, but the sequence in which the bolts were printed. On the label, this is referred to as “Shade.” The instructions are very specific about cutting and hanging strips of paper in the order they come off the roll, and using consecutive rolls in their proper order.

However, for this 11 bolt living room, I got 8 bolts of Shade series 4 (#’s 1-8), and 3 of Shade series 5 (#’s 7-9 … and what happened to the first six?!). These obviously were not printed in consecutive order! And they were all mixed together in the boxes. Good thing I checked the labels and noted the Shade numbers, before I cut anything up.

Luckily the layout of the room worked so that I was able to keep Shade 4 and Shade 5 on separate walls, so any slight color difference would not be noticeable.

Oil Spot Damages Wallpaper

November 25, 2017

Digital Image


Before putting up a mural, I like to spread the strips out on the floor, to get an idea of the pattern, the layout, dimensions, etc., and to be sure the sequence is correct.

Little did I know that the homeowner had recently oiled her furniture, and drops of oil had gotten onto the floor. The oil got onto the wallpaper and created several permanent stains. Whoops!

Luckily, only one strip was effected. It was the end piece (far right of the mural) and was not needed. Whew!