A cozy nook. The homeowner likes to spend time here, soaking and relaxing. And recovering from supervising high school athletic activities ! This is a 1939 4-plex in the Montrose area of Houston that was beautifully renovated into a single-family home. So this entire master suite is carved out of what was originally one 1- bedroom apartment . Note my white 2′ x 4′ sheet of plywood over the claw-foot tub , so I can safely access the wall above. The wallpaper was placed on just one accent wall , above the tile wainscoting / chair rail . During the initial Sunday afternoon consultation , both the homeowners and I felt that this pattern on all the walls of this large master bathroom would be too overpowering . So they opted for just one accent wall . The design doesn’t have a strongly noticeable secondary or vertical pattern , but I still took the time to center the most dominant feature (the pomegranates) on the tub faucet . The faucet guy , tub guy , and tile guy didn’t get everything perfectly lined up – but nobody’s even noticing. What matters is that the finished nook looks fantastic! Also of note is that, in this near-100 year old home, the wall was bowed , and it wasn’t possible for the tile to lie flat against the entire surface. So there were some areas where the grout was 1/4″ wide, and some areas where the wall actually overshot the tile, leaving no visible grout at all. So at the area where the wallpaper met up with the top of the tile and the uneven grout line, I made a fat cut , to try to disguise the uneven line. Do a Search here to see previous posts on fat cuts . This wallpaper design is by William Morris , who was a strong force during the late 1800’s and early 1900’s , in the Art Nouveau and Arts & Crafts movements . His work is having a resurgence in popularity right now. Most are more symmetrical and repetitive than this example ( Google Strawberry Thief ) , but, true to the design aesthetic , all of them involve natural elements , such as plants , flowers , fruits , birds , and animals . In this close-up shot, you can see the raised ink of this print , which gives a slight textured feel . The manufacturer is Morris & Co. Usually M&C prints on a user-friendly non-woven material . But in the last year or two I’ve come across more and more M&C that are printed on the old-fashioned, traditional, what we call a British pulp substrate . Non-wovens are strong , durable , stain-resistant , humidity – resistant , easy to install , and easy to remove when you redecorate . Pulps , on the other hand , are just the opposite . Do a Search here to see my previous posts. None of this is a deal-breaker. The installer just needs to know what he’s getting into, before taking on the project. We hunted. This particular pattern was not available by any vendor in the NW material. Maybe it’s COVID , or supply chain issues , or maybe it’s a British thing (even though many American and Canadian companies are printing the Wm Morris designs ). Couldn’t find any outfit offering Fruit in non-woven. At any rate, the paper went up beautifully, and the basic paper material will hold up well, even if the homeowner steams up the room on her long tub soaks , and the pattern is lovely in the vintage home with new tile , tub , and faucet .
These new(ish) non-woven / paste the wall wallpapers have a lot of advantages , and most of us installers like working with them. But a lot of brands can be very stiff, and can be difficult to get to lie flat on your table, for both measuring and pasting. I’ve found that rolling the paper backwards , either by the strip of the entire roll , will help get rid of that ” memory .” Some materials can be damaged / creased when you do this, so it’s important to work gently, and even better to use an unopened roll or other tubular object to start rolling around. Then I use elastic hairbands from the dollar store to hold the paper in place. It doesn’t take long. Just 15 minutes will usually do it. Here is a roll that has been rolled backwards, now released and relaxed and lying perfectly flat on my work table.
A lot of high-end wallpaper manufacturers use heavy inks (a.k.a. stinky ink). When wet paste is rolled on to the back of the wallpaper, these inks commonly compete with the substrate for moisture. The substrate absorbs more moisture and more quickly than the inked areas.
The result is wrinkles, blisters, bubbles, warps, quilting, waffling – whatever you want to name it, you’ve got a bumpy surface that doesn’t want to lie flat on the wall.
One way to tame this beast is to LIGHTLY sponge water onto the surface of the paper, before pasting. This allows the front to absorb moisture at the same time that the backing is soaking up moisture from the paste. The result is a more even “quilting” of the material.
Another thing to keep in mind is that small blisters like seen in the photo will usually flatten out and disappear as the wallpaper paste dries. A good wallpaper-specific primer underneath is a big help.
Also, a liner paper is often a good choice. The liner is a special, unprinted paper that goes under the decorative wallpaper. The liner absorbs moisture quickly and helps “lock down” bubbles and seams.
A liner also ups the installation price. Because you have to add the cost of the material, plus the labor of at least an additional day to hang the liner, and then let it dry at overnight or longer.
The Wallpaper Lady's Blog 