Posts Tagged ‘line up’

From Dark and Dated to Light and Livable

December 17, 2022

Oh, my! – I hung lots of these chintz florals, ” satin ” look (the design of the dark green at the bottom of the wall), and dark colors back in the ’90’s . Sure enough – this home was built and wallpapered in 1994.
IIt’s still a good look, IMO, and the homeowner still likes it. But she’s just gotten tired of it. So – time for an update !
She also decided to eliminate the chair rail , so the new wallpaper will go ceiling to floor . Here you see some damage to the drywall where the chair rail molding was removed .
What a change! Now the room’s look is quiet and fresh .
The buffet , topped with a decorative mirror , will go on this wall . That’s why I centered the pattern in between the windows , so it will fall evenly on either side of the furnishings .
I also plotted so that a full “Moroccan lantern” (that’s what this style of trellis pattern is called), would balance out between the crown molding and the window molding. There were several of these 12.5″ high areas all around the room, so this placement of whole “lantern” motifs gave the room a pleasing look.
It also worked out that the lanterns were evenly placed and kept whole between the crown molding and the baseboard. See the second following photo to see what I’m talking about
As a note – just this one window wall took me about five hours to measure , calculate , and hang . Getting the pattern to go over, around, and under the two windows , and still line up and match correctly , took some time and futzing. The material was thick and stiff , and a bit tricky to fit into corners and trim around the decorative window molding .
In the foreground you see my work table area . The homeowner has let me put protective padding on her dining room table and then set my work table on that. This saves space and allows plenty of room for my ladder and other tools as I work around all four walls.
So that I could center the pattern on this wall , I had to start hanging my first strip in the middle of the wall. I was lucky this time, that the pattern was centered exactly on the edge of the wallpaper roll . Sometimes (as in the one I did yesterday – see previous post ) the center of the design motif is a to the right or left of the edge of the wallpaper . This, naturally, means you’ve got to do more measuring and plotting and double-checking , to be sure the center of the design falls down the center of the wall .
Back to the photo above … that dark block on the right side of my work table is my laser level. It’s shooting a perfectly plumb red line onto the wall. Here I’m lining up my first strip of paper butted against this red line .
Switch topics … Back in 1994, the original installer did a very nice job of hanging the wallpaper. But … he didn’t prime the new drywall first. That lack of primer / protective layer means that the wallpaper will actually bond to the drywall. I tried, but was unable to get the existing wallpaper off . Eventually, you need to factor in time , damage to the wall , paste residue left on the wall, and take a different tac if called for.
So I skim-floated over the seams , so they wouldn’t show under the new paper , and also floated over the damaged drywall where the chair rail had been removed . Sanded smooth , and then primed the patched areas as well as the original wallpaper, with Roman Ultra Prime Pro 977 . This stuff will adhere to the light acrylic (slick) surface of the original wallpaper, as well as protect it from moisture from my paste on the new wallpaper. ( Moisture could cause the underlying original wallpaper to expand , creating bubbles that will look bad, or loose areas that will pull away from the wall, creating a bubble or pocket.)
My primer is also lightly pigmented, so it helps block out the dark color and busy pattern of the original wallpaper . This particular new wallpaper is quite opaque , but not all of them are, so a pigmented primer is important , IMO .

Left corner of the buffet wall. Here you can see how the lantern motifs are placed between ceiling and floor.
The background has a lightly mottled effect, that mimics grasscloth a bit, and also adds more depth and warmth than just a plain solid color .
Been havin’ more than a fair share of defects lately, especially this week. This paper had on both front and back sides, incidences of these black flecks . They seemed to be maybe charcoal , so I wasn’t too worried about their black bleeding through to the surface , like ink or any oil-based substance will do.
Most of them were embedded in the material itself, so could not be wiped off , nor dug out with a razor blade . Some I had to cut around and discard the affected paper. Others were so small as to not be noticeable once the paper was up on the wall and all the furniture and artwork was back in the room.
There was also one 3′ section of wallpaper that had an odd streak or arc running across it. It wasn’t ink . It was more like some kind of compromise to the substrate . I noticed it was I was pasting the back of the paper . I turned it over and, sure enough, you could see it a little on the surface. (see photo in previous post) It’s the kind of thing that was subtle, but would catch your eye when looking at the wall from a distance . It was minor , but I discarded that strip . Good thing I have the homeowners purchase a little extra wallpaper .
The manufacturer is Designer Wallcoverings , which is a good quality brand (aside from the printing defects I described earlier ). It was a non-woven / paste the wall material , which is pretty user-friendly . It will strip off the wall easily and in one piece when you redecorate . Stain-resistant , and ” breathable ” in humid conditions .
The home is in the West University neighborhood of Houston . Dining room installer

More William Morris Strawberry Thief in Houston Heights Hall Bathroom

June 24, 2022
Because I feared unstable walls in this 1920’s bungalow in this neighborhood (do a Search for previous posts), before hanging the decorative wallpaper, first I hung a non-woven liner paper on all the walls. That’s the white material you see in the photo.
The liner was hung horizontally so its seams can’t line up with the decorative paper. The idea is to disperse tension from drying wallpaper and changes due to humidity and etc., so as to deflect tension away from sketchy wall surfaces, and thus prevent delamination of multiple unstable layers deep inside the wall. Again, do a Search here to learn more.
Finished vanity area, with pattern centered on the light fixture.
Corner shot.
This colorful and symmetrical pattern is quite popular; I’ve hung it a number of times just this year.
Englishman William Morris designed wallpaper and fabrics during the late 1800’s and early 1900’s.
The styles then were Art Nouveau and Arts & Crafts. This design reflects a bit of each.
Wallpaper expands when it gets wet with paste, and then can shrink just a tad as it dries. The liner helps prevent that, but you can still end up with teeny gaps at some seams.
To prevent the white backing from showing through, I run a stripe of dark paint under where each seam will fall.
I use matt finish craft paint from the hobby store, diluted with a little water (in the orange bottle cap) and smeared on the wall with a scrap of sponge. Use a ruler or level and a pencil to mark where you want to stripe the dark paint.
Remember to allow for that expansion as the paper absorbs moisture from the paste. Meaning, if the paper is 20.5″ wide, and expands 1/2″, you’ll want to run your line at about 21.” And make sure that your painted swath is about an inch wide.
I also run a bit of dark chalk along the edges of each strip, to prevent the white substrate from showing at the seams (no photo).
Morris & Co. makes this iconic Strawberry Thief.
Interestingly enough, most times when I’ve hung a Morris paper, it’s been a non-woven paste-the-wall material.
Today’s option was a surprise – a traditional British pulp . This is a pretty basic and somewhat old-fashioned type of substrate . Sort of like construction paper, or the pages of an old family Bible .
The paper is very fragile , and can tear easily. You have to keep using new razor / trimming blades, because the material dulls blades quickly, and when dull they will drag and tear the paper.
Pulp papers also require a soaking / booking time after pasting , to allow time for the material to absorb the paste , soften a bit, and expand . The edges of the strips like to dry out , so I’ve learned to dip about 1/4″ of the booked ends ( booked means the pasted side of the wallpaper strip is folded onto itself, bottom edge folded up and top edge folded down to meet in the middle), into a bucket of clean water.
Then it goes into a black plastic trash bag to soak and relax for a few minutes before hanging. I use this opportunity to paste the next strip.
Non-woven wallpapers have advantages, because they do not expand when wet, and therefor you can get accurate measurements. They also can be pasted and hung immediately, with no waiting time. Alternately, you can paste the wall .

Different Prep & Installation Techniques

April 15, 2010

Please click the links at right to learn about me and my business.

After I finished my two-day job yesterday (which turned out very well, BTW, two tones of blue stripes on white paper in two young boys’ shared bathroom), the client made the comment that she was glad she hired me.  Here are some things she mentioned.

1. My work was beautiful.

2. The other installers she talked to had quoted higher prices.

3. The other installers stated they were not going to remove the existing wallpaper.

4. The other installers had said that there would be places were the stripes would not line up and would not match.

My thoughts:

3. I agree that it can sometimes be difficult to remove existing wallpaper, especially the very thin tight paper in this room, and that SOMEtimes it’s possible to prep the existing paper and hang new paper over it. But a paperhanger should always at least TRY to remove the paper. That eliminates worries about loose places here and there, and about the new wet paper causing bubbles in the paper surface below.  Plus, the fewer layers and the less bulk you have on the wall, the less chance of something pulling away down the road.

4. Yes, houses are never truely “square” or true to plumb, and stripes can be tricky to install. But there are many tricks of the trade, so to speak, that can actually make stripes EASIER to install, and easier to hide such flaws as this particular room had, like the mirror that was 1/2″ out of square with the wall from it’s top to bottom edges. Planning ahead to have to live with crooked lines is like giving up before you’ve started.

Instead of making excuses for inaccuracies, I say devise a way to eliminate, or at lease minimize, the chances of them occuring.