From Dark and Dated to Light and Livable

Oh, my! – I hung lots of these chintz florals, ” satin ” look (the design of the dark green at the bottom of the wall), and dark colors back in the ’90’s . Sure enough – this home was built and wallpapered in 1994.
IIt’s still a good look, IMO, and the homeowner still likes it. But she’s just gotten tired of it. So – time for an update !
She also decided to eliminate the chair rail , so the new wallpaper will go ceiling to floor . Here you see some damage to the drywall where the chair rail molding was removed .

What a change! Now the room’s look is quiet and fresh .
The buffet , topped with a decorative mirror , will go on this wall . That’s why I centered the pattern in between the windows , so it will fall evenly on either side of the furnishings .
I also plotted so that a full “Moroccan lantern” (that’s what this style of trellis pattern is called), would balance out between the crown molding and the window molding. There were several of these 12.5″ high areas all around the room, so this placement of whole “lantern” motifs gave the room a pleasing look.
It also worked out that the lanterns were evenly placed and kept whole between the crown molding and the baseboard. See the second following photo to see what I’m talking about
As a note – just this one window wall took me about five hours to measure , calculate , and hang . Getting the pattern to go over, around, and under the two windows , and still line up and match correctly , took some time and futzing. The material was thick and stiff , and a bit tricky to fit into corners and trim around the decorative window molding .
In the foreground you see my work table area . The homeowner has let me put protective padding on her dining room table and then set my work table on that. This saves space and allows plenty of room for my ladder and other tools as I work around all four walls.

So that I could center the pattern on this wall , I had to start hanging my first strip in the middle of the wall. I was lucky this time, that the pattern was centered exactly on the edge of the wallpaper roll . Sometimes (as in the one I did yesterday – see previous post ) the center of the design motif is a to the right or left of the edge of the wallpaper . This, naturally, means you’ve got to do more measuring and plotting and double-checking , to be sure the center of the design falls down the center of the wall .
Back to the photo above … that dark block on the right side of my work table is my laser level. It’s shooting a perfectly plumb red line onto the wall. Here I’m lining up my first strip of paper butted against this red line .
Switch topics … Back in 1994, the original installer did a very nice job of hanging the wallpaper. But … he didn’t prime the new drywall first. That lack of primer / protective layer means that the wallpaper will actually bond to the drywall. I tried, but was unable to get the existing wallpaper off . Eventually, you need to factor in time , damage to the wall , paste residue left on the wall, and take a different tac if called for.
So I skim-floated over the seams , so they wouldn’t show under the new paper , and also floated over the damaged drywall where the chair rail had been removed . Sanded smooth , and then primed the patched areas as well as the original wallpaper, with Roman Ultra Prime Pro 977 . This stuff will adhere to the light acrylic (slick) surface of the original wallpaper, as well as protect it from moisture from my paste on the new wallpaper. ( Moisture could cause the underlying original wallpaper to expand , creating bubbles that will look bad, or loose areas that will pull away from the wall, creating a bubble or pocket.)
My primer is also lightly pigmented, so it helps block out the dark color and busy pattern of the original wallpaper . This particular new wallpaper is quite opaque , but not all of them are, so a pigmented primer is important , IMO .

Left corner of the buffet wall. Here you can see how the lantern motifs are placed between ceiling and floor.

The background has a lightly mottled effect, that mimics grasscloth a bit, and also adds more depth and warmth than just a plain solid color .

Been havin’ more than a fair share of defects lately, especially this week. This paper had on both front and back sides, incidences of these black flecks . They seemed to be maybe charcoal , so I wasn’t too worried about their black bleeding through to the surface , like ink or any oil-based substance will do.
Most of them were embedded in the material itself, so could not be wiped off , nor dug out with a razor blade . Some I had to cut around and discard the affected paper. Others were so small as to not be noticeable once the paper was up on the wall and all the furniture and artwork was back in the room.
There was also one 3′ section of wallpaper that had an odd streak or arc running across it. It wasn’t ink . It was more like some kind of compromise to the substrate . I noticed it was I was pasting the back of the paper . I turned it over and, sure enough, you could see it a little on the surface. (see photo in previous post) It’s the kind of thing that was subtle, but would catch your eye when looking at the wall from a distance . It was minor , but I discarded that strip . Good thing I have the homeowners purchase a little extra wallpaper .

The manufacturer is Designer Wallcoverings , which is a good quality brand (aside from the printing defects I described earlier ). It was a non-woven / paste the wall material , which is pretty user-friendly . It will strip off the wall easily and in one piece when you redecorate . Stain-resistant , and ” breathable ” in humid conditions .
The home is in the West University neighborhood of Houston . Dining room installer

Textured Faux Grasscloth on Master Bedroom Accent Wall

Before. I’ve skim-floated the textured wall , sanded it smooth , wiped off the residual dust , and then primed with Roman Pro 977 Ultra Prime wallpaper primer . Now we’re ready for wallpaper !

Done! Just a bit of texture , and a little neutral color to add some warmth to this large , mostly-grey , master bedroom . Oh – and some subtle sparkle . See following photos .
It looks like real grasscloth . But it’s a faux! To help these homeowners avoid the disappointing color variations and low durability of real grasscloth , I encouraged them to consider textured vinyl products that recreate the look and texture of the real stuff , but without the drawbacks. Please click and read my link to info about grasscloth on the right of this page.

Real grasscloth , and the fauxes , as well, have visible seams (very minimal issue with the fauxes). So it’s important to balance the strips , so you have equal widths of panels as you traverse the wall. In other words, you don’t want five 36″ wide strips and then one 20″ wide strip.
And you’ll want to center those strips on the wall. Position them so you have an equal number of equally-sized strips on both the right and left sides of the wall.
Another design concept is to not have a seam fall down the center of a wall. Rather, it just feels better aesthetically to have the strip straddle the center line .
Here I’m hanging my first strip, having already calculated where the center of the wall is, the center of the wallpaper panel is, measured over to where the seam should fall, and then placed the red line of my laser level so it will guide where I should butt the edge of the wallpaper against.
That’s my Bosch laser level gizmo sitting on the top of the headboard, shooting its red light beam onto the wall.

Another shot. I’m using the vertical light beam ; the horizontal beam is not relevant in this install .

This textured vinyl material does a pretty darned good job of recreating the look and feel of real grasscloth . This photo is from about 6′ away.

A closer look. Note the bit of silver shimmer in the background , that adds a luxe look to the overall effect .

The wallcovering is by York , one of my preferred brands . It’s on a non-woven backing , which has many advantages over traditional paper-papers. It’s breathable , stain-resistant , will strip off the wall easily and in one piece with minimal / no damage to the wall when it’s time to redecorate .
It can be hung by the paste-the-wall method (which is what I did today) or the paste the paper technique (which I use most of the time).
I felt that the seams laid down better and had less ” rebound ” edge curl from factory trimming than many of the heavier vinyl faux non-woven backed materials I’ve worked with. In other words, I liked this product pretty much!
this particular material was also thin and flexible , so it was easy to work with and manipulate if needed.
The home is in the Spring Branch area of Houston.

Busting a Myth – Dark Wallpaper Makes Rooms Look LARGER – Not Smaller

Everyone advised this homeowner not to put black in the dining room, that it would make the room too dark. But she had a vision and went with her gut. She was right – the room looks fabulous and elegant. And the texture and sheen on the walls visually expanded the space.

There is enough white molding in the room to play against the black. And the satiny drapes, along with the slight sheen of the grasscloth wallcovering bounce light around the room.

Accent wall in dining room. White swirls (look closely – they’re snakes!) add movement that make this wall lively, not closed-in.

In this master bedroom , everything’s dark – dark green walls , black ceiling , and black floral wallpaper .
If this accent wall had been left painted green , the room would have felt dark and lifeless . But the black against the green, along with the limited color pallet and the visual movement of the wallpaper pattern visually push the wall back and add depth .

This powder room started out all black. And it was a bit oppressive .

But add wallpaper with a little color and pattern , and now the room feels larger and alive with personality .

A powder room with black moldings and black wallpaper. Nothing claustrophobic here!

Another powder room that started out with black painted walls . Yes, it has an enclosed feeling.

Wallpaper with a black background and dark flora / fauna open up the space.
wallpaper installer houston

Classic Look in Historic Home in the Woodland Heights

This large 2-story home was built way back in 1985 – a whole 12 years before the Woodland Heights (Houston) neighborhood in which it sits was platted and developed. It just underwent a major renovation, but retains most of its original details, such as floor plan, windows, moldings, flooring, pocket doors, and much more. There are several large, regal live oak trees on the property.

The homeowner chose this classic damask pattern with a weathered look for all four walls of the dining room. It perfectly suits the room.

It took me about two hours of measuring, plotting, engineering, hanging, removing, re-hanging, yada, to get the design to perfectly flank either side of the window. All that work was worth it, to have the design fall symmetrically. But the real show-stopper is the view of those oak trees through the window!

This wallpaper is by Designer Wallpapers, and is lovely to work with. The interior designer for the job is Stacie Cokinos of Cokinos Design. She is the go-to designer in the Heights for whole-house remodels and new builds.

I threw in a photo of my work table, just for fun.

Tune in tomorrow, to see the finished room!