Posts Tagged ‘low water content’

Rebel Walls Gives You Paste

February 24, 2022
I carry 5-gallon buckets of wallpaper paste in my van. But to make it easy for DIY’ers, includes a box of paste with every order. This is powdered paste that needs to be mixed with water. This may be lightweight and easy to ship, but I don’t like to use it when hanging a non-woven material like theirs.
Non-wovens are prone to staining and blushing (look like they’re wet but never dry out) . Most often this is caused by the paste – usually a paste that is too “wet” or, in other words, has a high moisture content. Roman 880 is notorious for this, as is Dynomite (now Roman) 234.
But a paste that you make by mixing powder into water seems even more risky for having a high water content, and causing staining. And so is the practice of dampening the back of the paper with a damp sponge, or a spritz of water from a squirt bottle. In my mind, too much water / moisture = risk of staining or blushing.
I say, skip the anxiety and use a low-moisture pre-mixed vinyl adhesive such as Roman 838 or Dynomite 780 (also now made by Roman). Clay pastes are also known for low water content – but I definitely do not recommend on a non-woven material, as I’ve seen the red clay bleed through far too many wallpaper surfaces.