Textured Faux Grasscloth on Master Bedroom Accent Wall

Before. I’ve skim-floated the textured wall , sanded it smooth , wiped off the residual dust , and then primed with Roman Pro 977 Ultra Prime wallpaper primer . Now we’re ready for wallpaper !

Done! Just a bit of texture , and a little neutral color to add some warmth to this large , mostly-grey , master bedroom . Oh – and some subtle sparkle . See following photos .
It looks like real grasscloth . But it’s a faux! To help these homeowners avoid the disappointing color variations and low durability of real grasscloth , I encouraged them to consider textured vinyl products that recreate the look and texture of the real stuff , but without the drawbacks. Please click and read my link to info about grasscloth on the right of this page.

Real grasscloth , and the fauxes , as well, have visible seams (very minimal issue with the fauxes). So it’s important to balance the strips , so you have equal widths of panels as you traverse the wall. In other words, you don’t want five 36″ wide strips and then one 20″ wide strip.
And you’ll want to center those strips on the wall. Position them so you have an equal number of equally-sized strips on both the right and left sides of the wall.
Another design concept is to not have a seam fall down the center of a wall. Rather, it just feels better aesthetically to have the strip straddle the center line .
Here I’m hanging my first strip, having already calculated where the center of the wall is, the center of the wallpaper panel is, measured over to where the seam should fall, and then placed the red line of my laser level so it will guide where I should butt the edge of the wallpaper against.
That’s my Bosch laser level gizmo sitting on the top of the headboard, shooting its red light beam onto the wall.

Another shot. I’m using the vertical light beam ; the horizontal beam is not relevant in this install .

This textured vinyl material does a pretty darned good job of recreating the look and feel of real grasscloth . This photo is from about 6′ away.

A closer look. Note the bit of silver shimmer in the background , that adds a luxe look to the overall effect .

The wallcovering is by York , one of my preferred brands . It’s on a non-woven backing , which has many advantages over traditional paper-papers. It’s breathable , stain-resistant , will strip off the wall easily and in one piece with minimal / no damage to the wall when it’s time to redecorate .
It can be hung by the paste-the-wall method (which is what I did today) or the paste the paper technique (which I use most of the time).
I felt that the seams laid down better and had less ” rebound ” edge curl from factory trimming than many of the heavier vinyl faux non-woven backed materials I’ve worked with. In other words, I liked this product pretty much!
this particular material was also thin and flexible , so it was easy to work with and manipulate if needed.
The home is in the Spring Branch area of Houston.

Scalamandre Textured Stripe

This is one of those jobs that you have to see in person to fully appreciated, because the photos show only a fraction of the coolness of this material.

The homeowner of this brand-new home in the Garden Oaks neighborhood of Houston loves to entertain, and he has a large personality. He turned his living room into a bar / lounge / reception sort of area. It’s the first thing you see as you enter the house.

This room has a lot more luxe and drama and cool furnishings that I am not showing, out of respect for my client’s privacy. But suffice it to say, the overall effect will really WOW everyone who walks into the home.

Scalamandré makes this product, which is called “Pacific Stripe.” It has a high plastic content, which allows for the heavily textured surface, as well as a lot of Mylar, which accounts for the metallic-like sheen.

One photo shows this material rolled out on the floor, to see how the pattern plays out across the width. Turns out the dark striped ridges come nine to a set. The edges on either side of the goods have more than nine ridges … This means that when strips are placed next to one another, you will end up with many more than nine ridges at each seam. So some has to be trimmed off of either side of the wallpaper, to ensure that each band of stripes has only nine ridges.

Lots of higher-end papers need to have their selvedge edge trimmed off. But this is the first time I’ve encountered a thick, textured paper that had to be hand-trimmed. Note the photo showing this process.

My goal was to leave four ridges on the right side of the paper, and then five ridges plus a flat line on the opposite side of the paper, to maintain the correct rhythm of ridge-to-flat spacing. The paper was dark, and the lighting was poor, so it was difficult to see where to trim.

Also, the thickness of the ridges held my 6′ metal straightedge off the material, so it was very important to hold my razor blade absolutely straight, to avoid a beveled or wavering cut.

It helped that the contractor had painted the wall black (per my specs), so, after I deglosssed and then applied my clear primer Gardz, there were no worries about background color peeking out at the seams. As extra assurance, I colored the edges of the paper (which was bonded to a white substrate) with dark chalk.

Scalamandré provided no instructions or information of any sort, so I followed my gut as for paste, booking time, and other installation techniques.

The product was very thick and stiff. It was difficult to trim through and took many swipes of my razor knife. A simple accent wall like this is one thing … but this material would have been a real pain to hang in a room that had intricate decorative moldings, or in a complicated room like a bathroom – I would probably have had the homeowner remove the sink and toilet and then replace them after the wallpaper was up. ($$ to pay the plumber!)

As it was, this single accent wall behind a well-loved entertaining area was the perfect spot for it.

The homeowner is overjoyed with the finished bar. In fact, he can’t wait to host his first party!