Soft Geometric Accent Wall in Mother In Law’s Suite

Headboard accent wall before. Textured wall was skim-floated and sanded smooth, then primed. Now it’s ready for wallpaper.

Finished.

Closer look.

Detail. The seams were invisible. The lines on this paper are raised a bit, so there is a 3-D effect.

I hung this non-woven wallpaper by the paste-the-wall method. Here I have rolled the strips backward, to prevent the decorative surface from hitting the paste on the wall. When I’m at the top of my ladder, I will take off the elastic hairband and let the paper unfurl down to the floor. It’s rolled so the top of the strip comes off first.

I have measured the wall and noted where the center point is, then determined where I want my first strip to fall. The black box in the foreground is my laser level, and you can see the vertical red line it’s shooting at the wall, which is where I am going to line up my first strip.

Positioning the wallpaper strip along the vertical laser line.

This muted geometric pattern is in the Jaclyn Smith Home line by the Trend division of Fabricut. It was mighty nice to work with, and will hold up for years until the family is ready for a change of decor. Then, the polyester-content non-woven material is designed to strip off the wall easily and in one piece.

The home is in the Memorial Villages neighborhood of Houston.