Before. Heavily textured wall has been skim-floated with smoothing / joint compound and then sanded smooth , and then primed with Roman Pro 977 Ultra Prime wallpaper primer . I’ve run a narrow line of dark green craft paint along the top of the chair rail / wainscoting , due to uneven edges . More on that in a soon-future post. Sink wall is done. Pattern is centered nicely on the faucet and in between the electrical boxes for the new sconces – They haven’t arrived yet and will be installed in a few weeks . The homeowner’s carpenter created this beautiful wainscoting out of 3D block paneling , and then painted it a rich dark hunter’s green . Right now there’s some sanding dust collected on it, plus bad lighting . In person, it’s gorgeous . The same company did a fantastic paneled wall / fireplace surround in the family room (not pictured) . Back to wallpaper … This shot is pretty color-accurate. I love the way the dark wallpaper coordinates with the green paneling . The pink and orange flowers , as well as the row of purple foliage , really stand out against all the dark . Close-up looks like an artist’s painting . Besides centering the pattern on the sink wall, the dimensions worked out so that I was able to balance the chameleons between the ceiling and chair rail , one just below the ceiling and the one here just above the chair rail. So no critter got cut in half . This product comes as a 2-strip (roll) set , with an “A” strip and a “B” strip in each box. Together, the two strips equal just a hair under 6′ wide , and a little over 9′ high . Here I’m rolling out the two strips so I can gauge the pattern , measure width and height , and plot the layout on the wall. Sobering fact: Each 2-strip set (one “roll”) cost about $500. This room used four of those sets. I always try to keep that in mind when working with people’s purchased wallpaper . OK, this damned Word Press blog account has AGAIN (2nd time in two nights!) deleted paragraphs that I spent a lot of time typing. I can’t recreate all the info I put into that lost post, but below I will try to include some of the important points. First and foremost – since the switch to the New Editor back about 2015, I pretty much HATE WORDPRESS . Anyway, here the company is providing a mock-up of what the “A” and “B” strips look like. The mock-up above shows the two panels next to each other. Since this is essentially a mural and the pattern doesn’t repeat vertically as more typical wallpapers do, you can plan on getting only one strip out of each panel. These walls are 6′ high , and the panels are 9′ high. So you’re losing 3′ with every strip. Further, the area over the door needed one panel that’s 2′ high. But an entire 9′ panel was needed for this, to get the 2′ high strip. So 7′ are going into the trash. Add to that, since this product comes as a 2-panel set , the homeowner had to buy a 2-panel set (at $500), even though only part of one panel would be used. This means that 1 + 2/3 9′ long panels were purchased but not used. Also, because this comes in panels instead of traditional rolled goods, there are no “extra” strips. This means that I can’t make any mistakes. Nothing like a little pressure while trying to install wallpaper ! No fears … this pattern and material went up nicely, and we had just enough paper to git ‘er done. Manufacturer is Breeze and the pattern is called Fantasy Tree . It was purchased from one of the show rooms in one of the Design / Decorative Centers in central Houston. It’s printed on the user-friendly / DIY – friendly non-woven material , which can be hung by pasting the paper (which I prefer) or the paste-the-wall method . It’s designed to strip off the wall easily and in one piece with no damage to the wall when it’s time to redecorate . Definitely better than peel & stick (click my link on the right to read more about P&S ). The home is in the Oak Forest / Garden Oaks / Heights neighborhood of Houston .
Two opposing accent walls , above the paneled wainscoting , will be papered in this dining room . Here’s the south wall finished. Super cool how the flowers tumble from the sky downward . This was actually two murals put together . Before you purchase , it’s important to make sure that one mural can be placed next to the other and have the pattern continue from one to the next . Instead of starting in a corner and working across the wall , I plotted to put the fullest part of the mural in the center. This will nicely frame a buffet, or other furniture used on this wall. Since this is a mural and each strip of wallpaper is different, and because I’m starting in the center with Strip #3, and then working left to right, and then going back to the center starting with Strip #2 and working from right to left, and because with a mural you have only one of each needed strip, so if you screw something up there is no more backup wallpaper to bail you out … So it’s important that you measure and plot and re-check everything before you cut anything and before you take any strip to the wall. So here you see all my strips cut and positioned as they will be placed on the wall. This is a paste-the-wall non-woven material , and note that I have rolled each strip backwards with the top coming off first, and secured with an elastic hairband from the dollar store. This both gets rid of the ” memory ” of the paper wanting to stay tightly curled up , and also keeps the printed face of the wallpaper from bopping into the pasted wall . Here’s the north wall, before.Instead of centering the pattern on the full width of the wall, I centered it on the left section. First strip going up butted against the vertical red line of my laser level .Bosch brand , less than $100 at Lowe’s . This wallpaper is called Artemis Climbing Walls and is in the Blackthorn collection . Manufacturer is House of Hackney . This outfit makes some mighty nice wallpaper , and they have some very fun an innovative designs. Most are sold as a 4-panel set mural , and can sometimes be tricky to measure for. It’s a nice non-woven material , durable, and the seams are invisible . I used the paste the wall installation technique . wallpaper installer houston
Re my previous post, before I visited, the homeowner had purchased 8 rolls (4 double roll bolts) of paper. This was just exactly enough (12 strips) for the headboard wall, but I told him to order 16 more to do the rest of the room. The new paper came in a different run. So we had Run 16 for the headboard accent wall, and Run 17 for the other walls.
(You can’t mix runs on the same wall, because different runs, printed at different times with different batches of ink, will be slightly different shades. This very slight color difference will show up on the wall as a striped or “paneled” effect.)
The wallpaper is by York. It is a non-woven material, comprised of synthetic fibers rather than wood and cotton. The synthetic material does not expand when wet with paste, which means the wallpaper can be hung via the paste-the-wall method, with no “booking” or “soaking” wait time needed.
Interestingly enough, Run 16 behaved differently from Run 17. I hung the accent wall with Run 16 quite successfully using the paste-the-wall method.
But when I started the next wall using Run 17, bubbles and wrinkles developed. The paper was absorbing moisture from the paste and expanding on the wall, creating the small bubbles. Quite unexpected with a non-woven material.
The solution was to paste the back of the wallpaper, rather than the wall. This allows the material to absorb moisture and expand a tad before you get it to the wall, so it will behave itself once it is on that wall.
Unlike a traditional paper, this non-woven material did not need a lot of time to absorb moisture, but could be pasted and hung immediately. This greatly speeds up the installation process.
Pasting the paper has an additional advantage in that it renders the material more supple and pliable, which makes it much easier to work around corners or manipulate into position in tricky areas.
The Wallpaper Lady's Blog 