Posts Tagged ‘paper-baced’

Stripping Solid Vinyl Wallpaper

April 21, 2018


This pre-pasted, paper-backed, solid vinyl wallpaper is one of my least favorite types due to its poor performance in humid areas. However, when it comes to stripping it off the wall, it’s one of my favorites. 🙂

Getting this paper off the wall is a matter of peeling off the top, printed, vinyl layer. This usually comes off in large pieces. The paper substrate layer will be left on the wall. That’s the light tan you see in the photo.

That layer gets soaked with a wet sponge and warm water. The backing will turn darker tan when it’s good and wet, as shown in the photo. It usually takes several applications of water, over a period of time, to reactivate the adhesive enough that the paper can be removed.

Sometimes that backing will simply and cooperatively come away from the wall. Other times you will need to use a stiff 3″ putty knife to gently scrape it off the wall, taking care to not gouge the wall or tear the drywall.

If the previous installer primed the walls, all this should go fairly easily and with minimal damage to the walls. But if no primer was used, it may take more care, time, and a little repair work to fix any damage to the walls.

See the page to the right on “How to Strip Wallpaper” for more information.

Advertisements