Sweet Toile Trellis For Baby Girl

Baby’s coming, so the nondescript tan walls in this this home office are about to make way for a nursery.

I love how one wall done contrasted against the plain painted wall shows how much more life and brightness wallpaper adds to the space.

Sweet, but not overly gooey , this pattern and simple two-tone colorway will grow with the child and be appropriate from infant to teen years.

Opposite corner.

Window wall.

Toile is a French word that describes a sort of pen & ink line drawing of one color on a simple background . Classic toiles are cherubs floating and shepherdesses playing flutes while lambs frolic in the meadow. But these days there are lots of themes, from seaside villages to Winnie the Pooh to the Cities series by Katie Kime (do a Search here to see more of that ).

This is a non-woven substrate with a lightly textured raised ink surface. It can be hung via the paste-the-wall method. But I usually prefer to paste the material , which worked nicely this time because the wallpaper was thick and stiff, and moisture from the paste softened it and made it much more pliable and workable .

This pattern is Rosalind Floral and it’s by McGee and Co. But I highly suspect that the actual manufacturer is York , one of my favorite brands.
This is a nicely renovated 1920’s home in the Heights neighborhood of Houston .
wallpaper installer

Doing the Opposite Today – Removing Wallpaper

The large medallion on soft lavender on all walls of this large bedroom worked well for this gal for many years – but now that she’s an older teen, it was time for an update.

So instead of putting wallpaper up, today I took it down.

Most people think that stripping wallpaper is difficult. But if the walls were prepped properly, and if the paper was hung properly, and if the proper removal steps are followed, it should all go well, with minimal damage to the walls. See my link at right, on how to strip wallpaper.

The most important thing is to separate the top, inked layer of paper from the backing / substrate layer. I find that wetting this top layer with a sponge and plain water helps strengthen the fibers, so the top layer can be pulled off in larger strips.

In the second and third photos, you see how the purple layer has been stripped off, leaving the white backing attached to the wall. This top layer has to be removed, because it has an acrylic (or vinyl) coating, and will not allow water to pass through it.

The next step is to soak the backing with plain water and a sponge (see photo). No chemicals, no additives – just plain warm water. You will have to reapply water several times. The idea is to let water soak through this backing layer, to reactivate the paste underneath. Once that paste is good and wet, it should release from the wall. Sometimes you have to gently scrape the backing from the wall. But in my case today, once that paste was reactivated, the substrate layer came away from the wall in full, intact sheets. Easy peasy!

One photo shows my “dull” 3″ stiff putty knife. I call it “dull,” because it’s old and beaten up. But it’s really rather sharp. I use it to carefully get between the inked top layer of wallpaper and the bottom substrate layer. And then I use it to gently scrape wallpaper from the wall.

In my case today, the previous installer had done a superb job of hanging the wallpaper. He applied a primer before hanging the paper. That primer helped make this whole removal job go well, and it protected the walls from damage.

The family will need to apply a stain blocker to prevent any residual paste from causing the new paint from crackling or flaking off. Once that’s dry, the walls can be textured and / or painted. The room’s resident told me that she is planning to go all white.

This home is in the West University area of Houston.