The homeowner wanted a tropical , jungle , palm , sorta wild look for her powder room . She unfortunately had not read my link (to the right) about the perils and misleading claims re peel & stick “wallpaper.” So she bought some and attempted to cover the walls in her powder room. First mistake was purchasing this stuff in the first place. Second was trying to hang over textured walls . Third was not having a properly smoothed , sealed and cured surface. Beyond that, just the concept of peel and stick material is a project doomed to fail. IMO Note wrinkles and warps in the material. Paper not adhering .More wrinkles and warps. Gap at seam over door .Paper looked good when she put it up, but seam split / opened within a short time . This is characteristic of P&S wallpaper , especially if the walls have not been prepped as spec’ed.So now the P&S has been removed , I’ll step in and skim-float the textured wall to smooth it , prime, and then we’ll be ready for wallpaper . REAL wallpaper !Done. No wrinkles , no warps , good adherence . She found a pattern that was very similar to her original choice , but more visually pleasing , I think, because it’s less “spiky.” A good idea of hers was to paint the sink / mirror wall , as this pattern on all four walls could have been overwhelming . This is a traditional wallpaper , install ed by pasting the paper . It’s good quality , seams were flat and invisible , and it was nice to work with. Close up. Closer-up.Just tossing in this photo of how I use a baby’s T-shirt to protect the toilet seat cover . I guess I forgot to take a photo of the label, but this is made by Designer Wallpaper . Pattern number is TA20004 . Oddly, when I Google this, I get pattern names of Jamaica and Tortuga . And also get the brand name Seabrook . Wallquest took over Seabrook, but leaving the old brand name on older patterns . My best suggestion here is, if you want this wallpaper pattern, contact Dorota at the Sherwin-Williams in the Rice Village of Houston (713) 529-6515 . She is the master at tracking down patterns and all things wallpaper. The home is in the Timbergrove / Heights neighborhood of Houston . installer
Before. Heavily textured wall has been skim-floated with smoothing / joint compound and then sanded smooth , and then primed with Roman Pro 977 Ultra Prime wallpaper primer . I’ve run a narrow line of dark green craft paint along the top of the chair rail / wainscoting , due to uneven edges . More on that in a soon-future post. Sink wall is done. Pattern is centered nicely on the faucet and in between the electrical boxes for the new sconces – They haven’t arrived yet and will be installed in a few weeks . The homeowner’s carpenter created this beautiful wainscoting out of 3D block paneling , and then painted it a rich dark hunter’s green . Right now there’s some sanding dust collected on it, plus bad lighting . In person, it’s gorgeous . The same company did a fantastic paneled wall / fireplace surround in the family room (not pictured) . Back to wallpaper … This shot is pretty color-accurate. I love the way the dark wallpaper coordinates with the green paneling . The pink and orange flowers , as well as the row of purple foliage , really stand out against all the dark . Close-up looks like an artist’s painting . Besides centering the pattern on the sink wall, the dimensions worked out so that I was able to balance the chameleons between the ceiling and chair rail , one just below the ceiling and the one here just above the chair rail. So no critter got cut in half . This product comes as a 2-strip (roll) set , with an “A” strip and a “B” strip in each box. Together, the two strips equal just a hair under 6′ wide , and a little over 9′ high . Here I’m rolling out the two strips so I can gauge the pattern , measure width and height , and plot the layout on the wall. Sobering fact: Each 2-strip set (one “roll”) cost about $500. This room used four of those sets. I always try to keep that in mind when working with people’s purchased wallpaper . OK, this damned Word Press blog account has AGAIN (2nd time in two nights!) deleted paragraphs that I spent a lot of time typing. I can’t recreate all the info I put into that lost post, but below I will try to include some of the important points. First and foremost – since the switch to the New Editor back about 2015, I pretty much HATE WORDPRESS . Anyway, here the company is providing a mock-up of what the “A” and “B” strips look like. The mock-up above shows the two panels next to each other. Since this is essentially a mural and the pattern doesn’t repeat vertically as more typical wallpapers do, you can plan on getting only one strip out of each panel. These walls are 6′ high , and the panels are 9′ high. So you’re losing 3′ with every strip. Further, the area over the door needed one panel that’s 2′ high. But an entire 9′ panel was needed for this, to get the 2′ high strip. So 7′ are going into the trash. Add to that, since this product comes as a 2-panel set , the homeowner had to buy a 2-panel set (at $500), even though only part of one panel would be used. This means that 1 + 2/3 9′ long panels were purchased but not used. Also, because this comes in panels instead of traditional rolled goods, there are no “extra” strips. This means that I can’t make any mistakes. Nothing like a little pressure while trying to install wallpaper ! No fears … this pattern and material went up nicely, and we had just enough paper to git ‘er done. Manufacturer is Breeze and the pattern is called Fantasy Tree . It was purchased from one of the show rooms in one of the Design / Decorative Centers in central Houston. It’s printed on the user-friendly / DIY – friendly non-woven material , which can be hung by pasting the paper (which I prefer) or the paste-the-wall method . It’s designed to strip off the wall easily and in one piece with no damage to the wall when it’s time to redecorate . Definitely better than peel & stick (click my link on the right to read more about P&S ). The home is in the Oak Forest / Garden Oaks / Heights neighborhood of Houston .
so-called peel and stick wallpaper is not nearly what the vendors’ websites make it out to be. It is neither easy to install , nor easy to remove . Nor does it hold up very long. I won’t hang it, neither will most of my colleagues across the country. Even our British counterparts have asked us to not let it slip across the pond! I won’t work with it, but one of the clients I visited yesterday did attempt to DIY try it on her own, with quite unsatisfactory results. She was kind enough to let me take photos . Here you can easily see wrinkles next to the door molding .gap at seam over door, warps along side door.hard to see, but there are large wrinkles. Plus notice on the right, paper is not adhering to the wall.seams shrink and gap.P&S material is not even trying to adhere to the wall.
A lot of these failures are due to the homeowners’ lack of knowledge and experience with peel & stick , and with wallpaper in general. For instance, the textured walls should have been smoothed / skim-coated / skim-floated before applying the material . Wallpaper wants to adhere to a smooth surface – not to the “highs and lows” of a textured wall . Next, most P&S instructions call for application on a semi-gloss paint , which needs to cure for 6-8 weeks. Also, read the fine print, and you’ll learn that P&S is meant as a temporary wallpaper …. you can plan on it starting to fail in less than a year. That’s where you get the failure to stick to the wall , and shrinking at the seams . Of course, here you can see that that happened within a few weeks / days. In this case, the material will be easily removable from the wall. But in most cases, if you’ve installed it on a smooth , primed wall, well, when stripped off, it will take the paint along with it. Leaving you with a nasty , pock-marked mess to have to repair. Click the link to my page on the right, about why to stay away from P&S.
In anticipation of this accent wall mural, the parents had the three other walls painted a soft salmon-y pink. Finished! I love the way the pattern ” crescendos ” toward the center and top…. perfect for cradling the crib. The blotchy look will disappear as the wallpaper dries, and the background will become more bright white. The mural came a set size, of 12.5′ W x 9′ H. The width fit the wall with just a few inches extra, which was perfect. But the wall was less than 8′ high and the mural was 9′, so we lost about 12″ of the mural. I brought the design as close to the ceiling as I could, while still preserving that light blue flower at the center top. This meant that most of the pattern lost was from the bottom, which has more stems and flowers – but not as pretty as the elements toward the top. And most of the bottom is going to be hidden by the crib and other furnishings, anyway. Also note that the right side of the mural pattern does not match up with the pattern on the left. Meaning, the mural does not continue from one mural to the next. This means that, if you have a really wide wall, for instance, or a powder room more than 12′ wide, you cannot place two or more murals next to each other and have the pattern continue uninterrupted. This is pretty standard for Anewall murals. But there are tons of other mural manufacturers who do make products that will accommodate wider spaces. And that are also custom-sized to your rooms’ specific dimensions. Close-up looks like a translucent watercolor painting. The pattern is called Wildflower . Cute hidden creatures like this snail. On her own, the mom originally purchased a peel & stick mural. Once she contacted me, I set her straight on how … err … awful that stuff is. (Click the link on the right to read my page about this material.) The company allowed her to send the P&S back and exchange it for this better quality pre-pasted option, which I like a lot. (I’m not fond of their traditional which is vinyl and requires special install techniques). Still, we had some issues which I’ve come to expect from Anewall, such as gaps and overlaps at the seams, and some minor pattern mis-matches at the seams . This is a newish home in the League City area of Houston.
Re my previous post about an under-the-stairs powder room that the homeowners attempted to install an argumentative peel & stick material … here is the finished room after I stripped off the P&S, smoothed the walls, and hung the new wallpaper choice. I engineered to place the sole philodendron leaf down the center of the ceiling. Where the under-the-stairs ceiling met the area over the door, the two surfaces came together in a very sharp angle. It was difficult to get in there and work, and to get the paper tight into the joint. Fingers can be too fat, so this is where tools can squeeze in there and save the day. This is also my kill point . Do a search here on that term for more info. A long story and maybe an hour or more of work, but you will note that there are no pattern mis-matches here. The homeowners were out of town, so I felt unpressured and could take as long as I needed to make these three areas look seamless. I love the hand-painted, water colory look of this pattern. This photo shows the joint where the walls meet the sloped under-the-stairs ceiling. A wallpaper pattern will never match perfectly in these situations. At first, I tried a few tricks to ” fool the eye .” But I decided it looked crisper and less distracting to just trim the two papers where they met. Here, we had the advantage that the tropical foliage pattern was busy enough that, I mean, really, when you step three feet back, who’s gonna notice a minor pattern mis-match, anyway? The pattern does match in the corners on either side behind the toilet, though (see photo). Even though this only 4.5″ high, it does lend subtle continuity to the room. When I see Candice Olson, I fast forward to glitz and glam and glitter and shimmer. Here her tropical foliage design is a bit more main stream. York is the mother company, and I love their products.
This home is in the Heights neighborhood of central Houston.
he lure of (false!) claims of easy to install and easy to remove led these homeowners to purchase peel & stick ” wallcovering ” and try to install it themselves. It did not go well. The wall was coated with a gloss paint, as per manufacturer’s instructions. Yet, here you can see that it is not even trying to adhere to the wall. Many brands come in rectangles of a few square feet, rather than traditional strips that are long enough to reach floor to ceiling. These small rectangles are much harder to keep perfectly lined up, so you are very likely to end up with overlaps or gaps at the seams. It’s not pliable or malleable, so won’t readily be eased into corners or turns. Here, note wrinkles and warps in the corner in the center of the photo, and at the ceiling line in the center top of the photo. The wall was not smoothed before applying the paper, so you see unsightly texture. The roughness is also interfering with good adhesion, because the paper is only sticking to the tops of the bumps, instead to the entire surface. So much for easily removeable. As you can see, trying to take this stuff down – it took the paint along with it.
The Wallpaper Lady's Blog 