Posts Tagged ‘red beam’

Light Bright Trellis Geometric Updates Red Dining Room

January 27, 2023
For more than a decade, the dining room was bold red from head to toe. In this photo, I’m applying drywall joint compound to smooth the textured wall .
Here’s the wall sanded smooth , primed , and ready for wallpaper .
Done. The next question is – what color to paint the bottom 1/3 of the wall ? What do you think?
Using the red beam from my laser level to center the design on the wall, and directly under the decorative corbel which the wood-worker homeowner husband installed as a feature to the crown molding .
Close-up. I also balanced the pattern between the ceiling and chair rail / wainscoting .
The wallpaper design is by Candice Olson , of HGTV fame, and is made by York , a company that I like a lot. It was purchased at a discount through Dorota at the Sherwin-Williams on University in the Rice Village . Call before heading over (713) 529-6515 . The homeowner had originally chosen something else, but it was unavailable. Dorota dug through her large library of selection books and found this, which is very similar, but more open and airy . We all three agree that this is the better option.
It is a non-woven material , and can be hung via the paste-the-wall method , or the paste-the-material method – which is what I usually prefer to do. This NW stuff is durable , stain-resistant , humidity -resistant , and easy to strip off the wall when you decorate down the road.
Cute in his bandana . But not very helpful at all! 🙂
The home is in the Candlelight Plaza / Shephard Park Plaza / Oak Forest / Garden Oaks neighborhood of Houston .

Textured Faux Grasscloth on Master Bedroom Accent Wall

December 9, 2022

Before. I’ve skim-floated the textured wall , sanded it smooth , wiped off the residual dust , and then primed with Roman Pro 977 Ultra Prime wallpaper primer . Now we’re ready for wallpaper !
Done! Just a bit of texture , and a little neutral color to add some warmth to this large , mostly-grey , master bedroom . Oh – and some subtle sparkle . See following photos .
It looks like real grasscloth . But it’s a faux! To help these homeowners avoid the disappointing color variations and low durability of real grasscloth , I encouraged them to consider textured vinyl products that recreate the look and texture of the real stuff , but without the drawbacks. Please click and read my link to info about grasscloth on the right of this page.
Real grasscloth , and the fauxes , as well, have visible seams (very minimal issue with the fauxes). So it’s important to balance the strips , so you have equal widths of panels as you traverse the wall. In other words, you don’t want five 36″ wide strips and then one 20″ wide strip.
And you’ll want to center those strips on the wall. Position them so you have an equal number of equally-sized strips on both the right and left sides of the wall.
Another design concept is to not have a seam fall down the center of a wall. Rather, it just feels better aesthetically to have the strip straddle the center line .
Here I’m hanging my first strip, having already calculated where the center of the wall is, the center of the wallpaper panel is, measured over to where the seam should fall, and then placed the red line of my laser level so it will guide where I should butt the edge of the wallpaper against.
That’s my Bosch laser level gizmo sitting on the top of the headboard, shooting its red light beam onto the wall.
Another shot. I’m using the vertical light beam ; the horizontal beam is not relevant in this install .
This textured vinyl material does a pretty darned good job of recreating the look and feel of real grasscloth . This photo is from about 6′ away.
A closer look. Note the bit of silver shimmer in the background , that adds a luxe look to the overall effect .
The wallcovering is by York , one of my preferred brands . It’s on a non-woven backing , which has many advantages over traditional paper-papers. It’s breathable , stain-resistant , will strip off the wall easily and in one piece with minimal / no damage to the wall when it’s time to redecorate .
It can be hung by the paste-the-wall method (which is what I did today) or the paste the paper technique (which I use most of the time).
I felt that the seams laid down better and had less ” rebound ” edge curl from factory trimming than many of the heavier vinyl faux non-woven backed materials I’ve worked with. In other words, I liked this product pretty much!
this particular material was also thin and flexible , so it was easy to work with and manipulate if needed.
The home is in the Spring Branch area of Houston.