Posts Tagged ‘restored’

Burnished Copper Colors in Home Bar Area

May 6, 2021

tThe homeowner loved the coppery-hued colors in this “Carousel Stripe” pattern by Cole & Son. The colors mesh beautifully with the wood tones, and also the brass faucet, in this home bar area.

What’s interesting is that I think the colors (especially the red) are more intense now, than in the samples she got from the vendor. In fact, one complaint of hers was that the vendor sent just one small snip of the paper, and didn’t show the full color spectrum of all 10 stripes that make up the pattern.

No matter. The finished effect really sets off the bar backsplash, and will be a fabulous backdrop once the bottles and glasses are back in place.

This wallpaper is a non-woven material, which is made of synthetic fibers rather than wood or cotton pulp. Instead of the paste-the-wall installation method, I chose to paste-the-paper. This made the material more flexible and manageable, which helped a lot, because when it was dry, it really wanted to crease and flake.

TFor instance, the racks sitting on the counter in the first photo could not be removed. Manipulating, fitting and trimming the wallpaper around the sharp bends and angles without marring the wallpaper was very difficult.

The non-woven, synthetic-origin material (think fiberglass) was also really hard to cut. Even with a brand-new razor blade, I had trouble getting perfect cuts around moldings, and also in a whole lot of other simpler areas.

These two rooms were hard enough, with minimal angles and corners and intricate moldings. If this had been a bathroom, or another room with a lot of turns and fancy cuts, it would have been really difficult to prevent creases and other damage to the wallpaper.

As it was, I spent about nine hours hanging these four single rolls of paper.

This is a wonderfully restored 1939 home in the Rice University area of central Houston.