This hall bathroom in a 1955 ranch-style home in the Briargrove / Tanglewood neighborhood of Houston was damaged by a roof leak during Hurricane Harvey. The contractor’s guys did a good job replacing drywall and painting the woodwork, but they fell short when it came to wallpaper. See first photo.
But this just gave the homeowner a chance to choose something that coordinated better with the decades-old tile that she loves (and that I love, too), and to pick a paper with more color and flair, that is more suited to her taste. See tomorrow’s post for that.
My first task was to remove the existing wallpaper. It turned out that there were two layers of paper, and, in some places, THREE layers.
In the second photo, I have removed most of the top (new) paper, which is the aqua trellis by Thibaut. I took it off by simply tearing it off the wall. Below it, you see the green savoy (small, tight, squiggly) by Waverly. Interestingly enough, I have hung this a bunch of times – in the ’90’s. 🙂
This paper was attached more tightly to the wall. To remove it, I had to first separate the top inked layer from it’s paper backing. You can see this in the second photo. Once the top layer, with it’s water-resistant acrylic surface was removed, it left behind a white paper backing. I used a sponge and bucket of hot water to soak the backing. It didn’t take long before the underlying paste reactivated, and then it was ready to let go of the wallpaper. You can see clean wall revealed in the photo, where the layers of wallpaper have come away.
In one area of the room, I got a surprise. There was a third layer of paper under the others. The top vinyl layer had been stripped of eons ago, but the tan, gritty paper backing was left on the wall. You can see this in the third photo dry (light tan) and soaked with water (dark tan). Once that tan paper backing got soaked enough with several spongings with hot water, the paste reactivated and the paper was happy to come away from the wall.
I was uncommonly lucky today, because whoever hung the original wallpaper had taken the time to prep the walls correctly. First, he skim-coated the textured walls to yield a smooth surface for the paper to adhere to. Second, he applied good quality penetrating sealer. This sealer might have been Gardz, a product that I use now, or another similar sealer, perhaps even a solvent-based (as opposed to water-based) sealer. His sealer provided a hard surface for the new paper to stick to, and also gave a surface that was resistant to all the water I was using to strip off the old wallpaper.
Check out the fourth picture to see the huge pile of wallpaper I pulled off this one small hall bathroom.
Once all the paper was off, the walls were in very good condition. There were no delaminated areas, no lifted areas, nothing that needed patching – just an amazingly intact surface.
I did a few little touch-ups to a few little areas (I wanted to clean up 60 years of grime collected along the top of the tile), and then rolled on my favorite wallpaper primer, by Roman’s, their Pro 977 / Ultra Prime. It’s a white pigmented primer, and is a wonderful surface to hang wallpaper on.
The Wallpaper Lady's Blog 