Posts Tagged ‘sap’

Rust From Water Damage Will Stain Wallpaper

August 11, 2020

Look to the right of the can. Notice the tiny spots of red. This is rust, and rust is bad because it (along with certain other substances, like ink, tar, oil, tobacco, water stains, wood sap (knots), mold, mildew) will bleed through wallpaper. Maybe not immediately, but, over time, it will work its way through the primer and the paper and to the surface, leaving a spot that cannot be washed off.

Actually, there was a whole lot of rust along the entire height of this wall’s corner. An air conditioning leak had kept the drywall wet for a period of time, and rust had formed along much of the metal corner – called a “bead.”

I skim-floated over the affected area with joint compound, and that buried the rust … for a while. But rust (and other substances), will eventually work their way to the surface, leaving spots on the wallpaper.

So a stain blocker was called for, which will prevent any stains from bleeding through. For this I love KILZ – but only the “Original” oil-based version. The water-borne products just don’t measure up

Some reasons I skim-floated over the area was to provide a buffer space between the rust and the sealer in hopes that the rust would not make it all the way up to the surface, to create more material over the very corner itself that could soak up the sealer, and because the stain blocker would soak into the porous smoothing compound more so than to the sharp corner of the metal bead.