Posts Tagged ‘scale’

Dark and Moody Bedroom Accent Wall

August 4, 2022
The wall has been skim-floated and sanded smooth , primed , and is ready for wallpaper .
The homeowner did a great job coordinating the wall and ceiling paint with the colors in the wallpaper.
This is a room that’s made for sleeping!

At first I thought the pattern scale was too small for the large wall. But once I saw it on the wall, I really like the way it fills the space.
To me, this pattern has a sort of calico look.
Close-up shows the light texture on the paper.
This is a non-woven material, so I’m installing via the paste the wall method . Here I’ve cut and arranged all my strips in the order in which they will be hung . This is a drop match pattern , which some folks think of as A and B strips. Meaning, for instance, an orange flower appears at the top of the wall on Strip A . But the next strip, Strip B, has a yellow flower at the top. When you get to the third strip, we are back to an A and an orange flower. Next comes another B strip – and so on.
I’ve rolled the strips backward , with the top of the strip coming off first. This will prevent the printed face of the wallpaper from bumping into the pasted wall during installation .
Wallpaper often shrinks a tad when the paste dries , and this can result in very minute gaps at the seams . With dark wallpapers , it’s pretty important to take steps to prevent white from showing at these gaps. Here I’ve measured out where each seam will fall, and taken diluted black paint to make a dark stripe under each seam . I don’t make the paint full-strength, because wallpaper paste isn’t formulated to adhere to paint. I want the wallpaper adhering to the primer I’ve applied. That’s also the reason why you don’t want to roll paint over the whole wall.
Also, I have only striped some of the seam areas, and will wait until some strips are up on the wall before striping more lines. This is because wallpaper expands when it gets wet with paste, which can make it difficult to plot the exact width of each strip as you move across the wall.

I use acrylic craft paint from the hobby store, applied with a bit of sponge. I keep a small dish of water to dip the sponge into, which dilutes the paint a bit.
You also see a stick of chalk pastel . See next photo.
Besides the wall peeking out from behind the wallpaper seams , it’s also possible / probable that the white edges of the wallpaper backing / substrate will show at the seams. I take a stick of chalk and run it along the edges, making sure to apply from the backside, to avoid getting chalk onto the surface of the wallpaper.
Be sure to use chalk pastels and not oil pastels – oil will bleed and stain wallpaper. Some installers use liquid paint or markers – again, be sure to use water-based or acrylic , and never oil based or permanent markers .
BN Walls is the brand. Altogether, this was a pretty nice product to work with. It was thin and very soft and flexible (many non-wovens are not).
I wasn’t happy with all the seams, though. I believe the paper was cut with dull or wobbly wheels at the factory, because the edges seemed to not be perfectly straight . So I ended up with gaps and overlaps in some areas. Here you can see the wallpaper edges pouching up a bit due to excess paper.
But, as I mentioned, this material was quite flexible, so it was pretty easy to spread these edges apart an use a tool to push them apart and then down to prevent them from pouching up again. Once the paste started to dry, these areas held nice and tight and flat.
This is a townhome in the Rice Military neighborhood of central Houston .

The Big Easy On The Walls

March 5, 2022
West wall smoothed, primed, and ready for wallpaper.
The homeowner used to live in New Orleans, and she tells me that signs like this are very common in local convenience stores and neighborhood dives. Transplanted to Houston, these signs are very dear to her heart as a reminder of her roots – and the funky lifestyle in the Big Easy.
She wanted the signs recreated somehow to cover the walls in their newly-renovated powder room in the Houston Heights. I suggested she contact rebelwalls.com , who custom made the paper and sized it specifically to fit each wall in the room individually. I measured and made drawings, and a designer named Simon at RebelWalls laid it all out.
North wall before. This is the wall with the toilet and sink.
There were a couple of glitches, the first being that the strips were printed about 10″ longer than I requested. No biggie – I’d rather have too much paper than come up short.
But the main glitch being that I had asked for this “sign” to be centered over the toilet, which meant that the center of the sign (I used the middle fleur-de-lis) would land at 17.5″ from the wall to the left. But somehow it got printed to where the left edge of the pattern was 17.5″ from the wall … That left a whole lot of white space between the wall and the design, and also pushed the words too close to the mirror, which will hang over the sink to the right.
After careful measuring, calculating, and testing, I determined that if I used my straightedge and razor blade to take off a 12″ wide slice from the left side, the “sign” would move to the left such that its center would fall over the mid-point of the toilet.
VoilĂ ! As you see in the photo, now the words are nicely balanced on this section of wall, and will not crowd the mirror which will be hung to the right.
The rest of the wallpaper moving to the right is unprinted, so as to leave a blank slate for the mirror to hang on. Here you see that wall, and also the wall to its right. This east wall has the same sign, but in a smaller scale, sized to fit the narrower wall. It’s also placed at a different height
Graphic designer Simon used my drawings and measurements to get the words nicely centered on this wall. The area above the door to the right (not visible) is left blank.
Here is the west wall (on the right) abutting the south / window wall.
The bull-nosed / rounded edges / corners such as you see around the window are really a pain with wallpaper, especially when they go both around the sides and the top, and can lead to some impossibilities. Too complicated to get into here. But I was pleased with the way this worked out. And the placement of the pleated shades toward the front of the opening helped a lot, too.
One interesting thing to note is that the thickness of this non-woven wallcovering (along with the joint compound I used to smooth the textured wall) is enough that it narrows the space inside the window just a tad,,, and that makes it a bit tight for the shades to fit back in,,, and that opens the potential for abrading the wallpaper as the shade is raised and lowered over time.
Another point … even though the widths of the wall spaces to be covered were different, we requested that the size of the font on the “sign” lettering be the same on the west wall and the north / mirror wall, and ditto for the window wall and the door wall.
I also made sure that the “signs” started at the same distance from the ceiling. This then ensured that each “sign” would land at the same distance from the tile below it.
Synchronizing the size of the fonts as well as the spacing between ceiling and tile helps immensely to lend a feeling of unity and order to this room.
I spent a full 2 1/2 hours plotting, measuring, testing mock-ups, and going back to the drawing board, before I ever cut any paper.
Prior to that, there were two visits to the home to get measurements and kick around options with the homeowner. In addition, she spent countless communications with the manufacturer and with our specific designer.
All this futzing is important, because, with murals, there is no second chance. There’s only one of each panel, and if one gets screwed up, there are no more to pull off the bolt, like you’d have with regular rolled goods.
RebelWalls is the manufacturer. I’ve had lots of great installs with this company.
What was inside our box, including Simon’s dimensions and lay-out.
Basic installation instructions. Ours was a bit – a whole lot – more complicated, because it covered not one but four walls. In our case, it worked best to have each wall be a separate mural, so to speak.
RebelWalls includes free wallpaper paste. I prefer to use my own pre-mixed vinyl adhesive, which is SureStik Dynomite 780. Recently bought by Roman, so the name has changed to just 780.
Certain pastes have been known to ” stain ” non-woven wallpapers (areas look wet but never dry out). I think that a high moisture content in the paste has a lot to do with this. So I’m hesitant to use a powdered paste that needs to be mixed with water.
I’ll squirrel away that RebelWalls powdered paste for another, better suited job. For this home’s install, I’m sticking with my tried and true 780.
A coupla more notes.
One, this project was a study in vision, desire, anticipation, and patience. The homeowner first contacted me in July 2021. It took nearly eight months to come to fruition. Granted, they had a whole kitchen remodel in the middle, which also included an update to this powder room. But just speaking for the wallpaper, there were several site visits, many emails, and then innumerable communications with the design team at RW.
In fact, since I’ve hung lots of RebelWalls and am familiar with their process, I thought I could lay out the design. But this project of separate “sign” motifs for each wall section was taxing my skill set. Finally I laid down my pencil and paper and said, “Stop doing what you yell at your clients for doing, which is trying to do something you don’t have expertise in! RebelWalls has designers who are trained to figure all this out. So let THEM do the math and placement and calculating and layout.” So we turned it over to them, and within a short time they had it all worked out perfectly (except for those few glitches I mentioned). Their customer service was amazing.
All this was crucial to ensuring that mural pieces fit the wall perfectly and that the final product looks stunning.
I also want to mention that the RebelWalls quality is excellent. It’s a non-woven material which has many advantages (too numerous to go into here, but you can Search). The seams melt together like butter and are invisible – even on areas with all that bare white space with no pattern. On a simple accent wall, you can paste-the-wall to hang it. In this (and most) cases, I pasted-the-material, which gives more flexibility and also ensures that paste gets into hard-to-reach areas – like behind a toilet.
In addition, the non-woven material is designed to strip off the wall easily and in one piece when you redecorate.
The company offers scores of patterns, from cute to sophisticated, and, as we did this time around, can make custom creations.
Super customer service, too.

lottery , money order , checks cashed , household supplies

Gold on Black Peonies in Bellaire (Houston) Powder Room

February 25, 2022
Originally the walls were a drab sorta-white. The homeowner wanted something bold and fun for this small powder room. Good choice in pattern, scale, and color!
Rifle wallpaper has only been around a couple of years, but it’s gotten really popular. I’ve hung it a number of times already is 2022, mostly in the dark colorways. It’s a nice non-woven material and can be hung using the paste-the-wall method. Although I usually paste the paper, for various reasons.