The homeowner had removed a toilet paper holder that was recessed into the wall , leaving a 5″ x 5″ square hole. She said it was OK with her if I just put the wallpaper over the hole. It is a thick non-woven, and would have held up OK. Thing is, this trick works better for smaller holes, and I routinely do it with land-line phone jack holes. But this hole was larger, and you’d likely see an indented area. Also, if a seam fell on that hole, there would be no way to hold the paper together. One of my customers a couple of weeks ago fixed holes left from moving electrical boxes for wall sconces , and used this. I happened to have purchased it at Sherwin-Williams just the day before, and it was a success. It’s a light-weight metal mesh grid with a fiberglass mesh tape sort of “wings” on each side. The wings are self-stick, and hold to the wall.I didn’t think to get a picture of the hole before treatment, but here it is after the patch plate is in place, and after I’ve skimmed over it with joint compound. I let that rough patch dry overnight, then did a fine-tune skim-coat the next morning, which is what you see here.When that was dry, I sanded, wiped off the dust, and primed. I’m very impressed. No sucking in or pouching out, and it’s flat and solid. Oh, and a wallpaper seam did fall over it, so good thing I went the extra step to use this patch. wall repair patch installer houston
The accent wall in a Houston Heights master bedroom where I’m working is a little dark. Here I’ve removed the light sconces , and am getting ready to skim-float to smooth the textured wall . A little more light would be helpful! My bright 100 watt light bulb is screwed into a little gizmo that’s quite handy . It’s a socket for a light bulb that can be plugged into an electrical wall outlet . Alternately, as you can see, because there are two holes in the bottom of the metal prongs , you can slip the ends of the electrical wires into those holes . Of course, you have to be careful that the ends of those two wires ( one white and one black ) don’t touch each other . That could cause a spark and a shock , and maybe even trip the circuit breaker . Oh, and, also, be sure to turn the power off at the switch before doing this. If you want to be extra-cautious, you can kill the circuit at the breaker box – but really, turning off at the wall switch and then taking care not to let the two wires touch each other, will be pretty safe. When ready to work around this improvised lighting , especially with metal tools or wet wallpaper , I will turn off the power at the switch , remove the socket thingie from the wires in the wall , use screw cap wire nuts to cover the exposed wire ends , and tuck the wires a bit into the electrical box . Once the paper’s up in that area, I can reattach the socket and get me some light again. I stumbled upon these things at a garage sale decades ago, and got maybe 10 of them for a buck or two. But they’re still available in electrical departments of places like Home Depot and Lowe’s and our neighborhood favorite here in central Houston – Southland Hardware . They cost about a dollar or a dollar and a half each .
Before. Heavily textured wall has been skim-floated with smoothing / joint compound and then sanded smooth , and then primed with Roman Pro 977 Ultra Prime wallpaper primer . I’ve run a narrow line of dark green craft paint along the top of the chair rail / wainscoting , due to uneven edges . More on that in a soon-future post. Sink wall is done. Pattern is centered nicely on the faucet and in between the electrical boxes for the new sconces – They haven’t arrived yet and will be installed in a few weeks . The homeowner’s carpenter created this beautiful wainscoting out of 3D block paneling , and then painted it a rich dark hunter’s green . Right now there’s some sanding dust collected on it, plus bad lighting . In person, it’s gorgeous . The same company did a fantastic paneled wall / fireplace surround in the family room (not pictured) . Back to wallpaper … This shot is pretty color-accurate. I love the way the dark wallpaper coordinates with the green paneling . The pink and orange flowers , as well as the row of purple foliage , really stand out against all the dark . Close-up looks like an artist’s painting . Besides centering the pattern on the sink wall, the dimensions worked out so that I was able to balance the chameleons between the ceiling and chair rail , one just below the ceiling and the one here just above the chair rail. So no critter got cut in half . This product comes as a 2-strip (roll) set , with an “A” strip and a “B” strip in each box. Together, the two strips equal just a hair under 6′ wide , and a little over 9′ high . Here I’m rolling out the two strips so I can gauge the pattern , measure width and height , and plot the layout on the wall. Sobering fact: Each 2-strip set (one “roll”) cost about $500. This room used four of those sets. I always try to keep that in mind when working with people’s purchased wallpaper . OK, this damned Word Press blog account has AGAIN (2nd time in two nights!) deleted paragraphs that I spent a lot of time typing. I can’t recreate all the info I put into that lost post, but below I will try to include some of the important points. First and foremost – since the switch to the New Editor back about 2015, I pretty much HATE WORDPRESS . Anyway, here the company is providing a mock-up of what the “A” and “B” strips look like. The mock-up above shows the two panels next to each other. Since this is essentially a mural and the pattern doesn’t repeat vertically as more typical wallpapers do, you can plan on getting only one strip out of each panel. These walls are 6′ high , and the panels are 9′ high. So you’re losing 3′ with every strip. Further, the area over the door needed one panel that’s 2′ high. But an entire 9′ panel was needed for this, to get the 2′ high strip. So 7′ are going into the trash. Add to that, since this product comes as a 2-panel set , the homeowner had to buy a 2-panel set (at $500), even though only part of one panel would be used. This means that 1 + 2/3 9′ long panels were purchased but not used. Also, because this comes in panels instead of traditional rolled goods, there are no “extra” strips. This means that I can’t make any mistakes. Nothing like a little pressure while trying to install wallpaper ! No fears … this pattern and material went up nicely, and we had just enough paper to git ‘er done. Manufacturer is Breeze and the pattern is called Fantasy Tree . It was purchased from one of the show rooms in one of the Design / Decorative Centers in central Houston. It’s printed on the user-friendly / DIY – friendly non-woven material , which can be hung by pasting the paper (which I prefer) or the paste-the-wall method . It’s designed to strip off the wall easily and in one piece with no damage to the wall when it’s time to redecorate . Definitely better than peel & stick (click my link on the right to read more about P&S ). The home is in the Oak Forest / Garden Oaks / Heights neighborhood of Houston .
You’ve got to look at this close-up, to notice the antelope and flames / foliage . You gotta make a decision … The light sconces (they are currently removed, but you can see the electrical boxes where they will be placed) were centered on the vanity top, but the faucet was off-center by about an inch. So I chose to center / balance the pattern on the sconces and countertop. The mirror will be hung between the two light fixtures, so we’ll end up with a pleasing, balanced look. The faucet isn’t exactly in the middle of the design motif, but no biggie – there’s going to be a mirror there, anyway.
t
Corner going around shower. Note the window looking into the shower. Although the website specs said this is a pre-trimmed non-woven material , that was incorrect. Turns out it had an unprinted selvedge edge that had to be trimmed off by hand . Here I’m using my straightedge and razor blade to remove this selvedge. This takes precision and a LOT of time . The manufacturer usually provides trim guides to help you know where to cut. But it’s usually better to trim to the pattern – determine an element in the design motif that will meet up with the corresponding motif on the opposite side of the strip when the strips are hung on the wall, and use that as your guide . Be sure to trim off the trim guide marks, or they will show on the wall. The pattern is called Arabian Nights and is by Relativity Textiles . I’ve never worked with this brand before. I was not pleased . In addition to the incorrect information about the pre-trimmed paper , the mfgr’s specs said this was printed on a non-woven substrate . It was not. It wasn’t even printed on standard wallpaper stock . Instead, it was a pulp material – This is a sort of old-fashioned wallpaper , and is very brittle and prone to tearing and dragging (your trimming knife or razor blade will get snagged and you’ll end up with a ” chewed ” jagged cut, instead of a crisp cut . It also tears easily. It also has no coating, so it’s not stain-resistant … Not good in a busy household with a 3-year old toddler , or anyone splashing water or soap or air freshener . It was also difficult to hang . Applying wet paste to the backing causes the substrate to absorb moisture and expand at a different rate from the ink on the surface. So you end up with wrinkles , waffling , and quilting . Sponging a light bit of water on the front before pasting helps even out the moisture differential and ease installation . I’ve never before encountered a pulp that had this type of ink on the surface. One clue for this bad stuff is when you open the package and it smells like moth balls . Once I figured out how to work with it, , it went OK – although tedious . The seams did look very nice. BUT … all this effort would have been unnecessary and the finished room would be more durable if the mfgr had printed on a non-woven substrate (as their on-line specs stated) and had used standard inks instead of this weird , smelly , high-end stuff. In fact, the material would have cost the homeowners a whole lot less $ if it had been normal ink on a non-woven backing . The home is in the Woodland Heights neighborhood of Houston . installer
Primed and ready for wallpaper . The original color was a somewhat dark murky blue . The room just felt listless and small (it’s not a small powder room )Finished. Brighter and comfortable . This isn’t a statement-making wallpaper . But it’s all about lightening up the area, and making it feel welcoming at the same time. The light metallic accents in the pattern accentuate the color of the light sconces .The gold also works nicely with the oil-rubbed bronze faucet and handles . And the aqua melds nicely with the grey marble countertop . Close-up showing the printed texture . The paper also has a light raised ink texture to it. The design is called Tresco and is by Thibaut , one of my favorite brands . It’s in their Anna French line. This wallpaper is a non-woven material , and can be hung by the paste the wall method . I usually prefer to paste the paper . Non-wovens are strong and more stain resistant than other wallpapers. They are designed to strip off the wall easily and in one piece when it’s time to redecorate . Tanglewood houston installer
This is the mounting bracket for a sconce / light fixture . The fixture itself is exactly the same size as the bracket. So it’s unfortunate that the electrician used an electrical box that is too large . As you can see, the blue box shows on both the left and right sides of the light fixture. (I will also add that I think this light fixture is narrower than most – I suspect it was made overseas where boxes and codes are different from here.) In addition, the blue box juts out from the wall and will create a bump under the wallpaper , plus prevent the paper from adhering tightly to the wall . The jaggedly cut drywall will leave impressions under the paper, too. Here the plastic electrical box is recessed better into the wall. But there are still gaps on the left and right sides of the bracket. To get the wallpaper around the brackets without gaps showing , I removed the brackets, and then brought the wallpaper in to cover the electrical junction boxes by about 1.” (no photo) If the electrician needs more space for his wires , he can always trim the wallpaper back a little. In the instance of the box in the top photo, there will still be wallpaper that can’t sit tight to the drywall , but once the sconce is replaced you really won’t notice. I also had the option of leaving the mounting brackets in place and then placing the wallpaper over the metal plates. But first of all, I think this is against building Codes. And second, if the sconces are changed out later, or if someone needs to access the electrical connections, removing the mounting plates would most surely tear the wallpaper in the process. So, best to have the wallpaper behind the plates, rather than pasted on top of them.
Before, primed and ready for wallpaper. For various reasons, removing these mounting brackets for the light sconces would have created more problems than it solved, so I left them in place and worked carefully around them. The difficulty is that the sconces are exactly the same size as the mounting plates, so it’s difficult to trim around these plates that jut out from the wall and still get the paper close enough that no gaps show around the base of the light fixtures. When possible, it’s much easier to remove them and put the paper behind them. I chose to center the design on my first strip in between those two sconces, rather than on the faucet. Good thing this is a small and busy pattern, because neither the mirror nor the sink faucet were centered between the sconces. But no one’s gonna notice. If you look in the middle of the photo, you’ll see the vertical red line of my laser level. I’m using this as a guide to place the motifs down the center of the space. Here’s a shot of my laser level. Less than $100 at Lowe’s maybe eight years ago.Finished sink wall. The hooks are for the large, white framed mirror.Window corner next to the toilet. The mint green paint on the woodwork next to the light blue wallpaper print ties this room in beautifully with the other rooms on the first floor of this house. The colors also coordinate beautifully with some artwork in the dining room just steps away.The pattern is called Aboreta and is by Thibaut , one of my favorite brands. It’s a traditional paste-the-paper material , and was nice to work with. Thin and breathable and should hold up nicely in a humid bathroom. This was purchased from my favorite source for wallpaper and for help in finding what you’re looking for – Dorota at the Sherwin-Williams on University in the Rice Village . Her hours vary, so call before you head over.
This is a 2-room powder room in the Memorial Villages area of west Houston. The home is new and openly spacious, but has many classic elements like very elegant moldings and trim work. I absolutely LOVE this 1890’s Victorian era marble sink with metal legs – a lucky eBay score. The homeowner has young kids and an active family and wanted to do something ” wild ” in the powder room. I’d say this Wonderland pattern fills the bill!The look is especially effective due to the homeowner’s bold choice to paint the woodwork this rich mustard ochre color. Looking from the sink room through the arched doorway into the potty room. Cute, cute pattern! And lovely material to work with. The glass flower light sconces are vintage, too, dating to the ’50’s or ’70’s. A similar-themed glass, floral, and brass chandelier will hang in the adjacent potty room. This is the mirror that will go up, almost touching each light sconce on either side. The grey tones in the mirror look super good with the grey marble vanity / commode sink. Manufacturer is Borastapeter distributed by Brewster , both fine companies. It’s a non-woven material and can be hung by the paste the wall method or by pasting the paper. The original wallpaper came from Finest Wallpaper in Canada, a good company. But the homeowner ordered half of what was needed, and was not able to get more in time for our install date. I suggested she call Dorota at the Sherwin-Williams on University in the Rice Village (713) 529-6515) and, sure enough, she found a source that had the paper in stock and could get it here lickety-split. This is the second time I’ve hung this paper in one week, and I’ve hung it several times previously and have it coming up again – always in this dramatic and colorful black version. People sure love the whimsy of frolicking frocked pigs!
Before.AfterThe colors coordinate beautifully with the deep blue/green of the wainscoting.I love these colors, and the soft matt surface.Manufacturer is GP&J Baker, a British company.
After 25 years in their Pearland (south Houston) home, the couple was ready for an update. Hubby got his new bathroom a couple of years ago. Today the wife got hers!
The room was ripped out down to the studs. Then they got new: deep soaking tub, shower with geometric tile, toilet, vanity with marble top, burnished brass mirror & light sconces, and … wallpaper!
I love traditional patterns like this. And the dark colors really stand out against the white tile and countertop and floor.
This is a non-woven (synthetic) material, and is designed to strip off the wall easily and in one piece when you redecorate. It can be hung via the paste-the-wall method, or the paste-the-paper technique (I usually prefer this option).
This dining room accent wall started out the typical suburban taupe/grey color, with even the ceiling painted the same color. The homeowner thought the room looked cold before.
Accentuating this focal wall with a special silk-look wallpaper really brought appeal to the room, and the warmth the homeower was seeking.
The wall will be finished with an oval mirror, and distressed sconces, which will tie in nicely with the weathered-look chandelier.
The remaining walls, as well as the area below the chair rail, will be painted. I suggested picking a color that compliments, rather than matches, the wallpaper color. This will enable the papered wall to stand out, with it’s mottled colors and warm feel.
The wall will then fade into the background, allowing the mirror, sconces, and buffet to take center stage.
This wallpaper is by Designer Wallpaper. It is a traditional paste-the-paper product, and was nice to work with. It went better when I pasted, booked, and then dipped the edges into water before bagging, which helped prevent the edges from drying.
The home is in Kingwood, a northeast suburb of Houston.
The Wallpaper Lady's Blog 