Posts Tagged ‘sealing’

Wallpaper and YouTube Don’t Mix

December 31, 2017


This West University mother of young children went to YouTube for some primers on how to hang wallpaper, and then, along with hubby, spent a 3-day weekend tackling the powder room redo project. They didn’t do a horrible job (first three photos), but there were some things that must not have been covered on YouTube.

First, and probably most important, the walls should have been primed with a product designed for wallpaper.

Second, seams should be butted, not overlapped.

Third, wallpaper should not be wrapped around the door moldings, but trimmed at the base.

Fourth, I’m not sure what’s going on with the cuts at the baseboard. I think the room had seen a number of redecorating efforts, and that the baseboards took a bit of a beating in the process, leaving a surface that wasn’t smooth and wasn’t willing to hold on to wallpaper.

I stripped off their wallpaper, patched bad spots, sanded the walls, then primed with Gardz, a penetrating sealing primer that bonds together porous surfaces and that is also a good base to hold wallpaper.

The rest of the photos are of the room after I hung the new paper.

This product is a pre-pasted, paper-backed, solid vinyl material. It happens to be one of my least favorite kinds of wallpaper. The homeowner chose it because she has young children and the vinyl is reputed to be more water-resistant and durable than other types of wallpaper. If she had consulted with me before she bought her paper, I would have steered her in another direction.

It’s true that the vinyl surface is resistant to water, and it’s more resistant to stains than a paper-wallpaper. But that doesn’t make the product wonderful.

The main problem is the paper backing. This stuff is not horrible, but it does have a reputation for curling a tad at the seams (do a search on my blog for previous posts). Humidity (such as in a bathroom with showering) can cause increased curling at the seams. Any water that falls on a cut edge of the paper (along backsplashes, seams under hand towels, etc.) can wick into the paper backing and cause it to expand, which will cause the seams to curl.

To reduce the potential for seam curling, I used a special pasting process (rather than following the manufacturer’s instructions). And I ran a bead of caulk along the top of the backsplash (see 4th photo – the caulk will be clear when it’s dry) to prevent splashed water from wicking up under the wallpaper.

My trim cuts along the baseboard looked better than the homeowners’, but I still felt the baseboard was compromised somehow and that wallpaper did not have a good surface to grip ahold of. So I ran a bead of caulk along the top of the baseboards, too.

This wallpaper is by Exclusive Wallcoverings, a British manufacturer. It is a faux grasscloth, and, unlike true grasscloths, it is pretty water- and stain-resistant, and it has a pattern that can be matched. In fact, the close-up photo above shows a seam – and I’ll bet that you can’t find it! The pattern number is FD44143

Next time around, when a mom has concerns about her kids touching or splashing the wallpaper, I would suggest she consider one of the newish non-woven products. Or, better yet, a scrim-backed (woven fabric-backed) solid vinyl product, such as something from the Thibaut brand Texture Resource line, particularly Volume 4. Everything in that book is beautifully textured and realistic, and virtually indestructible. Do a search here to see my previous posts.

Advertisements

Old Wallpaper Could Not Be Stripped Off

July 12, 2017

Digital Image

Digital Image


The homeowner is ready for a new look, so the red wallpaper with the “broken coral” pattern has to go. I am pretty darned good at removing wallpaper, but this stuff was not agreeable with the idea.

Normally, you peel off the top, inked layer, and then soak the remaining backing layer with water until the paste loosens, and then you can either lift the paper from the wall, or gently scrape it off.

But this top inked layer came off in tiny pieces – 1/2″ square. Which meant it would take a year and a day to get the whole room stripped off. Then, on my test area, when I tried soaking the paper backing to loosen the paste, it would have non of it.

The backing would not come away from the wall. And in the tiny 1/2″ square area where I finally did get the paper off the wall, there were more problems underneath. Meaning, a gummy, rubbery substance that would not come off the wall, and that left a residue behind that was unsuitable for hanging new wallpaper on top of – it would have necessitated a whole lot of additional skim-floating, sanding, sealing, priming, etc.

I believe that the previous installer either primed the walls with RX-35, or hung the paper with VOV ( Vinyl Over Vinyl), both of which are inappropriate for this type of paper, and both of which are nearly impossible to remove, and both of which leave the gummy, rubbery residue that is so difficult to negate.

I found it preferable to leave the existing paper on the wall. I removed any loose areas (virtually none), and then skim-floated over the seams with joint compound, to remove any vertical lines that could show under the new paper. That’s the white stuff you see in the 2nd photo.

When dry, I sanded that smooth, wiped off the residual dust with a damp sponge, and then primed with Gardz, a penetrating sealing primer. This will yield a smooth, stable surface for the new wallpaper to grab onto.