A Really Nice Faux Grasscloth , Suitable for Bathrooms

The homeowner wanted the look of grasscloth, but didn’t want the stains that can happen when splashed with water or toiletries.  Another displeasing feature of real grasscloth is the very visible seams , and the likelihood of color differences between panels (called paneling or shading ).  So she opted for this textured vinyl version.  She loves the look.  It is a handsome room!

Original 1990’s paper has been stripped off, Roman Pro 977 Ultra Prime wallpaper primer has been applied, and we’re now ready for paper!

This material has a pattern that matches from strip to strip, so you don’t get the eye-jarring look of broken fibers at the seams , like with real grasscloth or other natural materials. 

Here’s a close-up, detailing the texture.  About ¼ from the right is a seam – it’s barely noticeable . 

Opposite wall.  For balance, I plotted that the seams fall at the same point on each wall – 18” from the mirror frame

I’m getting ready to hang a strip that will knock against that mirror frame.  To keep paste from slopping onto the molding , I’ve applied this thin, flexible blue plastic tape along the edge.  This will keep paste off the molding while I trim that strip to fit against the molding.  Once that trimming is done, I’ll remove the blue tape and then smooth the wallpaper back into place.

Since this is a dark wallpaper, I worry about the light colored primer peeking out at the seams.  This can happen because sometimes the factory hasn’t trimmed the edges perfectly straight , or the wall may have uneven areas or bows , or some papers shrink a tad when they dry .  So here I’ve plotted where the seams will fall and have striped the area with diluted paint .

I use bottles of craft paint from the hobby store (good old Texas Art Supply !), and apply with a scrap of sponge .  And my trusty Gatorade bottle cap with water, to dip the sponge into to dilute the paint … you don’t want full strength paint under there.  Wallpaper wants to adhere to a primer made for wallpaper – not paint designed to color Christmas ornaments. 

Another and probably more important trick is to color the edges of the wallpaper.  This navy blue wallpaper was printed on a white stock / substrate , and it’s highly likely that the edges of that substrate will show at the seams .  So, again back to Texas Art Supply (or a good hobby store) for chalk or pastel , which I run lightly along the edge from the back so as not to get any color onto the surface of the wallpaper .  That little dark nub you see is my chalk… the stuff breaks easily.  It’s important that you not get oil pastels or use any kind of ink marker, as these will leech into the wallpaper and stain it, leaving you with a nasty dark line down the seam . 

I really liked this product.  It was flexible enough to wrap around a rounded / bull-nosed corner , but stiff enough to not warp .  It’s on a non-woven substrate , which contains polyester , which makes it less likely to shrink .  This stuff is also designed to strip off the wall easily and in one piece with no damage to your wall when you redecorate .  Another advantage of non-wovens is that they can be pasted and hung immediately, with no booking or wait time.  Although I generally prefer to paste the paper , you also have the option to paste the wall with this material.
The non-woven backing won’t be sucking up humidity like the paper backings used years ago (or in modern lower-end products), so greatly reduced chance of seams coming loose if your teenager spends an hour steaming up the bathroom . 
The vinyl surface means that it will be resistant to stains from water , toothpaste , and little (and big!) hands . 
In addition, I liked that the material has a realistic grasscloth look, and a realistic texture , as well as a pattern that could be matched, which helps disguise the seams.  I didn’t match the pattern in the corners, though, to avoid having the horizontal bands running around every wall of the room at the same height.  Looks better to break it up a bit.  Also gave me more flexibility in placement of seams.   
The brand is A Street Prints and is in their Scott Living line  (as in the Scott Brothers of HGTV fame). 
The home is in the Champions Forest area of Houston .   
installer paperhanger

Potential Trouble Brewing

What you see here is a bit of rubbery latex paint and texture that has peeled away from the wall in this powder room. The surface underneath it felt gritty and dusty and porous. I had the feeling that if I had tried, I could have peeled all the paint off the wall.

This is not good.

This paint is probably peeling because of a combination of poor quality materials (cheap paint), improperly prepared surface (inappropriate or no primer, not removing dust from the wall, incompatible coatings (latex over oil based, not sanding or deglossing a gloss paint before repainting), climate fluctuations (humidity, temperature), stress on the wall (pulling off a piece of tape), or more.

All this is not so bad under paint, because paint just kinda sits there on the surface. But wallpaper actually puts stress on the surface beneath it, as it dries and pulls taught. Over time, fluctuations in humidity and temperature can exacerbate that, causing the paper to expand and contract ever so slightly, and then put tension on the wall where the seams fall.

This can result in not just the seams coming loose, but in the various layers inside the wall actually delaminating and coming apart from themselves.