Ditch the Peel & Stick! – Powder Room Re-Do

The homeowner wanted a tropical , jungle , palm , sorta wild look for her powder room .   She unfortunately had not read my link (to the right) about the perils and misleading claims re peel & stick “wallpaper.”  So she bought some and attempted to cover the walls in her powder room.
First mistake was purchasing this stuff in the first place.  Second was trying to hang over textured walls .  Third was not having a properly smoothed , sealed and cured surface.  Beyond that, just the concept of peel and stick material is a project doomed to fail.  IMO
Note wrinkles and warps in the material. Paper not adhering .

More wrinkles and warps.  Gap at seam over door .

Paper looked good when she put it up, but seam split / opened within a short time .  This is characteristic of P&S wallpaper , especially if the walls have not been prepped as spec’ed.

So now the P&S has been removed , I’ll step in and skim-float the textured wall to smooth it , prime, and then we’ll be ready for wallpaper .  REAL wallpaper !

Done.  No wrinkles , no warps , good adherence .  She found a pattern that was very similar to her original choice , but more visually pleasing , I think, because it’s less “spiky.”  A good idea of hers was to paint the sink / mirror wall , as this pattern on all four walls could have been overwhelming .
This is a traditional wallpaper , install ed by pasting the paper .   It’s good quality , seams were flat and invisible , and it was nice to work with. 

Close up.

Closer-up.

Just tossing in this photo of how I use a baby’s T-shirt to protect the toilet seat cover .
I guess I forgot to take a photo of the label, but this is made by Designer Wallpaper .  Pattern number is TA20004 .  Oddly, when I Google this, I get pattern names of Jamaica and Tortuga .  And also get the brand name Seabrook .  Wallquest took over Seabrook, but leaving the old brand name on older patterns .
My best suggestion here is, if you want this wallpaper pattern, contact Dorota at the Sherwin-Williams in the Rice Village of Houston (713) 529-6515 .  She is the master at tracking down patterns and all things wallpaper.
The home is in the Timbergrove / Heights neighborhood of Houston .
installer

Wallpaper in Better Homes & Gardens Magazine , May 2023 Issue

I always love to see wallpaper featured in a national publication . BH&G often does. This particular issue is also full of color and pattern – a nice shift away from the all-white or all-grey , minimalist look popular these days. Not all the articles included brand / pattern number , but similar designs can be found easily enough, especially if you visit my favorite source Dorota at the Sherwin-Williams in the Rice Village .

Delightfully bold and dark works wonderfully in a small powder room .

A little calmer .

More Bohemian / Indian / Middle East vibe.

Just please don’t get peel & stick . Ever. Read my info page link to the right.

Reminds me of postage stamps .

Beautiful Art Nouveau inspired design . Spoonflower makes lovely paper – as long as you get their pre-pasted smooth and not any other of their options. They have really innovative , fun patterns, too.
installer houston

Cool Patch to Repair Hole in Wall

The homeowner had removed a toilet paper holder that was recessed into the wall , leaving a 5″ x 5″ square hole. She said it was OK with her if I just put the wallpaper over the hole. It is a thick non-woven, and would have held up OK. Thing is, this trick works better for smaller holes, and I routinely do it with land-line phone jack holes. But this hole was larger, and you’d likely see an indented area. Also, if a seam fell on that hole, there would be no way to hold the paper together.
One of my customers a couple of weeks ago fixed holes left from moving electrical boxes for wall sconces , and used this. I happened to have purchased it at Sherwin-Williams just the day before, and it was a success.
It’s a light-weight metal mesh grid with a fiberglass mesh tape sort of “wings” on each side. The wings are self-stick, and hold to the wall.

I didn’t think to get a picture of the hole before treatment, but here it is after the patch plate is in place, and after I’ve skimmed over it with joint compound. I let that rough patch dry overnight, then did a fine-tune skim-coat the next morning, which is what you see here.

When that was dry, I sanded, wiped off the dust, and primed. I’m very impressed. No sucking in or pouching out, and it’s flat and solid. Oh, and a wallpaper seam did fall over it, so good thing I went the extra step to use this patch.
wall repair patch installer houston

Kill Point Over Door

aaHere’s what this flowing viny wallpaper pattern looks like in this dining room in the Garden Oaks / Oak Forest neighborhood of Houston . The bottom 1/3 of the wall is block paneling / wainscoting , so the wallpaper on just the area above is not overwhelming .
A kill point is the place in a room where your last strip of wallpaper meets up with the first strip you hung . this virtually always results in a pattern mis-match . So we try to hide that in an inconspicuous place, such as in a corner behind a door .
In this room, all of the corners are very visible . A mismatched corner of 7′ high would be very noticeable .

So in this room, I was able to cleverly disguise the mis-match in a much shorter area, over a door . This is only 6″ high . Here my first strip is on the left, and my last strip is on the right, with two short strips needed to bridge that gap .

Here the strip on the right has been put into place.

Here’s the piece that will butt up against the strip on the left. Eeek! It’s 1/2″ too narrow to cover the gap. Also, as you can see, there is an obvious pattern mis-match at that seam on the right.

look at this tree branch . I’m going to use that to my advantage.

Here I’ve taken another piece and have matched the pattern on the right side. Note that it’s not matching on th left.

Here I am, back to that strip we saw a few photos ago, that will match with the strip on the left. Remember tha tree branch I pointed out? Here I’ve trimmed the wallpaper vertically along that tree branch .

Here I’m putting it into place, butting it up against the strip on the left, and overlapping the strip on the right. But that’s going to leave a vertical ridge under this strip, where the strip underneath it ends on the left.

But you won’t notice that overlap if it runs under a design motif . Here I’m using a pencil to trace the outline of that tree branch, bringing it in so that the tree branch will overlap just 1/8″ – 1/4″ over the strip on the right.
Note that since the surface of this paper is vinyl , and wallpaper paste doesn’t always adhere well to slick plastic , I’ve used a special border paste or vinyl over vinyl or seam repair adhesive just on this small 1/8″ overlapped area .

Strip on the right trimmed to conform to the curves of the tree branch.

Tree branch piece being put into place.

Tree branch strip trimmed and finished.

SDone and viewed from below. OK, so the pattern doesn’t match 100% perfectly the way the designer intended. Some of the motifs are closer together than they “should” be. From here, who the heck is going to notice?! This looks pretty darned good – and it looks way better than having a 7′ long mis-match in a very visible corner .

The pattern is called Twining and is by Graham & Brown . It has a very light texture , and also a slight
metallic sheen on the branches . It’s a non-woven / paste the wall material , and will strip off the wall easily and in one piece when it’s time to redecorate . I like their papers a lot .
You can purchase G&B from Dorota at the Sherwin-Williams in the Rice Village . Call first, as hours vary. (713) 529-6515 .
Here’s another cool thing … Go back to that first photo. Since I started hanging paper by centering the pattern between the two windows on the wall to the right (not visible in the photo), by the time I worked my way around to the wall between the windows you see in front of you, the pattern was not going to be centered in between the windows. I thought it would look better if it was balanced symmetrically. So I positioned the dominant part of the tree branches in between the windows. And then I used the same overlap-and-disguise trick over the window on the right.

Think It’s Time For A New Brush?

Here’s the brush I’ve been using for cutting in my wallpaper primer around corners and moldings. It’s called a ” Short Cut .”
I love the little stubby handle. But not the stubby bristles! Nor the residue accumulated near the base and within the bristles, which makes the brush stiff.
Even though I clean it thoroughly after each use, residue builds up. Me needs me a new one!

Here’s the same brush, but this is the one I use for cutting in paste on paste-the-wall wallpapers.
Paste washes out better than primer, so this brush looks nearly new, even after more than a year of use.
I’d like another one of these, please!

My Short Cuts were from Home Depot. I love Home Depot – but Sherwin-Williams is more convenient. Plus, this week they’re having a 35% off sale for contractors. Can’t beat that!
My local S-W didn’t have the style I’m so fond of, so I went with this version by the same manufacturer ( Purdy ). It’s similar but has a slightly longer handle.
I thought I wasn’t going to like it much, but I used it today and turns out I barely noticed a difference!

Improperly Prepped Paint Peels Off Easily

this vanity was originally white . To update the powder room and coordinate with the new wallpaper , the vanity cabinet was painted this rich green . When hanging wallpaper , some paste will get onto the woodwork or cabinetry . Usually, it’s a simple matter to wipe this paste off with a damp rag (we like microfiber cloths ).

But as you can see, even gentle wiping with a damp cloth has taken some of the new paint with it. This is usually because the new paint was applied without having properly prepped the original surface. The original paint has a gloss / sheen , which makes it attractive , as well as resistant to dirt and stains . But new coatings (be they paint , latex paint , wallpaper paste , etc. ) won’t adhere tightly to a glossy surface .

So it’s imperative that the original surface be prepped correctly , before the new paint is applied . This means de-glossing . Deglossing can be done by sanding the surface to scruff it up, which will give a bit of “tooth” to the surface for the new coating to stick to. Or you can buy a chemical de-glosser from a good paint store like Sherwin-Williams or big box store like Home Depot . This is simply wiped on with a cloth . You can also use what’s called a bonding primer , which is formulated to adhere to just about anything , and then provides a surface that paint or other coatings can grab a hold of and stick to .
Once the original surface is properly de-glossed and primed and prepped , the new paint can be applied . Once that dries and cures , you can put stress on the surface, such as rubbing or wiping , without fear of the new paint peeling off .

Another weird thing is that the green color came off on my microfiber rag . I’ve had this happen with water-based / water-borne paints – but not with the old-fashioned oil-based paints . Not a big deal. Not enough of the color wiped off to cause any lack of color on the painted surface of the vanity . install

Geometric on Tricky Outside Corner

OK, never mind the ’80’s-era toilet paper holder that’s recessed into the wall here and is not removable – which presents a challenge all its own. My issue is adding the next strip of wallpaper to the left, turning the corner, and keeping the pattern matched as well as possible in both the inside corner and around the outside corner.
Usually, when turning inside corners, you wrap the paper around the corner 1/8 of an inch, and then cut a new strip of paper, match the pattern, and then overlap it that 1/8″ . That helps eliminate issues like mis-matches or wrinkles due to crooked corners or uneven / bowed / out-of-plumb walls . (no walls are ever perfect )
But in this case, we also have an outside corner to wrap. Even though it’s only about 2″ wide, that edge can cause the pattern to go off-plumb , or to create wrinkles in the wallpaper .
Going against most rules of wallpapering , I’ve decided to wrap the next strip around this 2″ wide wall and then onto the wider wall to the left .

Here I am, starting to position that next strip. I’m not going to try to wrap a full 27″ wide strip around this turn. Instead, I’ve trimmed it vertically along a horizontal stripe , which makes this strip narrower and more easy to handle , and also will help in placement of the next strip.

Now I’m pushing it into place into that corner. Note how the paper is wrinkling, both on the wide wall, and as it comes around the 2″ wall.

Another shot of the placement and wrinkles .

Using my plastic squeegee smoother to press the paper tightly into the inside corner. Note that, since the corner isn’t perfectly straight or plumb, there were a few areas where I couldn’t press the paper tightly into the wall, but had to leave a bit of a gap or air bubble, in order for the left edge to wrap around the turn.
The plastic smoother can also be used to gently push out wrinkles on the larger body of the strip of paper to the right. Don’t press too hard , nor overwork , because you don’t want to stretch the paper – that will cause more wrinkles.

The plastic smoother took care of the inside corner. Here I’m using my damp microfiber cloth to tightly press the paper around this outside corner .

OK. Paper’s wrapped tightly around this corner – but, because the corner isn’t straight , we’ve got wrinkles and warps .

Sometimes, you need to take a scissors to make relief cuts to help ease the paper around the corner . Try to make your cuts along an element of the design , to make the slit less noticeable.

here is that little narrow bit, finally wrapped around the outside corner. Now we need to add the next strip to the left of this. Note that this narrow strip isn’t straight nor plumb nor equidistant from the corner that we just turned. Nor is it equidistant from the next corner we have to deal with, which is to the left (not pictured).
Since we want the wallpaper strips to match in the corners, it’s important that the wallpaper pattern fall in the corner to the left at the same point from ceiling to floor. Complicated to explain.

So I’m taking a fresh strip of wallpaper , made sure the pattern matches correctly , and have trimmed it vertically along the tan stripe . Now placing it along this wrapped edge.
Because I’m overlapping instead of butting , I’m able to pull the new strip to the right or left, to keep it equidistant from the right outside corner . Or, from the inside corner to the left.
Actually, I don’t care much about the right side. The eye won’t notice if the new strip isn’t perfectly plumb . Nor will it notice if the pattern match isn’t 100% perfect . But it will notice if the pattern doesn’t match perfectly in the inside corner to the left.
So I’m pulling and manipulating and overlapping the strip a bit, so that the left edge of it is exactly 10-3/4″ from the left edge. This ensures that the pattern motifs fall all at the same point into that corner on the left.
Do I can cut my next strip, trim it vertically so the design matches with that in the corner, and get a perfect pattern match in the corner. Kinda difficult to explain, but I hope you can follow what I’m describing.

Note that this overlap is causing a bit of a ridge under the paper . Hard to see here, but when the paper dries and shrinks tight against the wall, it will be a little more obvious. But I’d rather have a ridge on the right, than a pattern mis-match in the corner to the left.
Oh, and never mind that little pattern mis-match to the right … that’s the paper wrapped around the corner, so you’re looking at different dimensions, not a pattern mis-match.

Here is that strip finished. The vertical strips isn’t perfectly plumb, but no one can tell that.
ut the pattern is perfectly straight in the inside corner to the left . So when I take my subsequent strip and trim it vertically to remove the right edge by approximately 10-3/4″ , the pattern should match perfectly in this inside corner. (It did!)

This “sort of” Greek key trellis geometric design is by Thibaut , one of my favorite brands. It was on a triditional paper substrate , and was hung via the paste the paper method .
It was purchased from my favortite source for wallpaper in Houston , Dorota Hartwig at the Sherwin-Williams in the Rice Village , who has more selection books than anywhere else in the city – and knows what’s in every one of them! Call before heading over (713) 529-6515 .
The home is in the Champions Forest area of northwest Houston.

Peeling Paint = Potential Problems

Here before hanging wallpaper, I have removed the light fixture over the bathroom vanity .  Some of the wall paint was stuck to the base of the light fixture, so was torn away from the wall when the fixture pulled away.  In the photo, the cream colored area is the current semi-gloss paint , and the greyish area is the paint that is beneath it. 
Problem is, wall coatings surfaces should adhere to each other.  In other words, the cream colored paint should not have peeled away from the grey paint under it.
Usually this happens because proper prep was not done before the new layer of paint was applied.  Surface coatings (meaning paint or wallpaper ) won’t stick to glossy surfaces, nor to dusty surfaces.  So, if you’re painting over gloss paint, first a deglosser needs to be used, or a bonding primer .  A good paint store guy ( Sherwin-Williams ) can advise you.  If the original surface has dust , as from sanding or construction , this needs to be wiped off with a damp sponge , and that has to be rinsed clean frequently.  Often a primer should follow that.  Again, consult a knowledgeable paint guy.
All of this is not so desperately important if you’re going to apply paint.  Even on an unstable surface , paint simply dries and sits there.  It only peels away if tension or pressure is put on it, such as removing the light fixture in the photo above.
But wallpaper is different.  Because wallpaper shrinks when the paste dries , tension is put on the seams .  If the surface below is unstable , this tension can cause the surfaces below to come apart / delaminate .  This can result in seams that pull away from the wall.
This is not the wallpaper pulling away .  This is the layers underneath that have actually come apart from each other.
And it usually cannot simply be ‘ glued back down .’ 
You can do a search here to read previous blog posts about this issue.  

Treating Water Stains

This window had leak issues ( rain , sprinklers ) some years back, which have been solved by replacing the window, and doing other repairs.  In the photo, I’ve applied my light blue wallpaper primer to the top half of the wall but not yet the bottom portion, so that’s why the color difference

Even though the leak has been stopped, vestiges of it are still appearing.  Water that entered the wall left vertical streaks on the drywall .  All these years later, after the paint and texture have been removed , the stains remain.

Water stains , along with some others, such as blood , rust , ink , marker , grease , oil, cosmetics , and the like, will bleed through joint compound , primer , paint , and wallpaper , creating new stains on the surface .  It may take a couple of months , but they will make an appearance . In this photo, I’ve already applied my blue primer. It only took a half an hour for these stains to work their way through.

This is the top right corner of the window , where the bracket for the mini-blinds is attached to the wall.  Note the stains on the underside of the window . 

To prevent these stains from working their way through the new coating / paint / wallpaper , it’s imperative to thoroughly cover them with a stain blocker .  And – trust me – water-based products won’t work, despite what the label claims.  You need an oil-based product like this KILZ Original , or a shellac-based like BIN by Zinsser .  Both are prone to splatter , so be sure to cover your floor and baseboards with dropcloths .  KILZ has strong fumes and can make you high , so ventilate or wear a respirator mask .  It’s a hassle cleaning the liquid out of the brush , so I use a cheap-ish disposable “ chip brush ” from Home Depot or Sherwin-Williams .  The products usually dry pretty quickly.
Note that wallpaper paste won’t stick to most oil-based primers , and shellac is too glossy for good adhesion , so I’m going to go over the stain blocker with my usual Roman Pro 977 Ultra Prime wallpaper primer , which sticks to just about everything , and creates a good, matt finish surface for the wallpaper to cling to.  

World Map Mural – Focus on Africa

This couple in a beautifully updated 1939 home (4-plex converted to single family) in the Montrose neighborhood of Houston loves Africa and has traveled there several times. This spare bedroom on the first floor is devoted to Africa. On the walls they have hanging artifacts from their travels.

And now they have a map of the continent , front and center!
accent wall

Close up looks like old paper that has been folded and stashed and aged , then uncovered and now placed on the wall.

The mural is custom-sized to the wall. Remember to add 3″ to both width and height, to accommodate trimming and also wonky walls.
The material comes as one big roll , with six panels all in one long piece. You have to unroll the whole thing and cut the panels apart . Note that five panels are 19″ wide. But that sixth one on the far right is only 16″ wide. I have cut off the 3″ overage. So when you’re plotting your lay-out, don’t go assuming that you will have six panels of the same width. That last panel is going to be whatever it needs to be, to custom-fit the size of the wall.
Here, I’m laying the panels out to compare dimensions of width and length with those of the wall . Also checking to be sure the sequence of panels is correct. Note the diagram provided by the company on the white sheet of paper at the top of the photo.

Here’s a close-up of the diagram / install instruction sheet .

The mural is by Rebel Walls , a part of Gimmersta . I love their hundreds of selections, their material , quality , and excellent customer service.

This particular mural is called World Map . I’m not sure, but it may come in other colors .

Here’s the mock-up the company sent. The homeowner requested that Africa be placed in the center . You see what a good job Rebel Walls did with that. The mural that we received was actually a little smaller, and didn’t contain that much of America on the left, nor the far right sides of the countries on the right.
Interestingly, the mural doesn’t meet up with itself. In other words, you can’t place two murals side-by-side. Look at the left, where America is. There’s only the eastern half of America. But there is no connecting western half of America on the right side of the mural. So you couldn’t order several of these and place them next to each other, to go around a bedroom , for instance. This may be because the mural was designed to fit one wall only , and to focus on Africa . It’s possible that the same mural is available so that it will connect to itself, and so that you could use it all the way around a room.

According to the shipping box, Rebel Walls is also connected with Sandberg , another manufacturer of fine wallpapers . This stuff comes from Sweden . It is a non-woven material and can be hung using the paste the wall method . I often prefer to paste the paper , but on this simple accent wall, I did paste the wall . Saves space, because I don’t have to set up my big table .
Non-woven wallpapers don’t expand when wet with paste like traditional papers do, which is a nice advantage for many reasons. They also are durable and stain-resistant . And are also designed to strip off the wall easily and in one piece, and with no damage to your wall when you redecorate .  Non-woven is MUCH better than the false-hopes peel & stick material being pushed by some mfgrs today. Click my link to the right.

Rebel Walls also includes special paste for this non-woven paper. This is important, because some other types of paste have been known to stain N-W’s, also called blushing – paper looks wet in areas, but never dries out .
It’s believed that excess moisture is a reason for this staining / blushing . Which is the main reason why I don’t used the paste provided by RW. If the powdered substance has to be mixed with water to turn into paste , it stands to reason that it can be too liquidy and could bleed through the surface of the wallpaper, causing staining.
I prefer a pre-mixed paste made by Roman called 780 . You can also use Roman 838 . These both have lower moisture contents, and have good record of not staining wallpapers . Most Sherwin-Williams stores carry these pastes. But call first!