Beautiful symmetry … But look closer – those intertwining lines aren’t fronds of vegetation – they’re snakes ! The wall before. It’s a mid-century home, but the drywall here is new. Per my request, the contractor left it taped and floated , but not painted or covered with any coating . I had planned to simply prime this wall. But after examining it more closely, the surface was a little grittier than I like. So I ended up applying a very light skim-coat and sanding it smooth . Here the smoothed wall has been primed with Roman Pro 977 Ultra Prime . I’m plotted out the center of the wall and am using my laser level to ensure that the design in my first strip falls right along the center, and also is nice and plumb . My work table with two strips of wallpaper . Spoonflower packages its wallpaper differently from other companies. It comes in widths of 24″ and lengths of your choice of 3,’ 6,’ 9,’ or 12.’ Get their Pre-Pasted Removable Smooth option, which is water-activated , and is wonderful stuff. Do NOT get the Peel & Stick , nor the Traditional Pebble . The P&S and the Traditional are both very difficult to work with, and can lead to bubbles and creases on your walls , plus cause damage when the wallpaper is stripped off later. Back to the photo – the blue cube thing in front is my laser level , shooting its red line at the wall. Close-up I’m using this blue plastic tape on the edge of this strip of wallpaper. This will prevent paste from getting onto the wall or ceiling. The accent wall stops in this left hand corner, so I need to trim off the excess. But I don’t want to get paste onto the un-papered wall. Paste can cause the wall paint to crackle and flake off. So here you see how the blue tape is keeping paste off the wall. Once I finish trimming, I’ll check the back to make sure all of the blue tape has been removed. Any areas where the blue tape might be still on the back of the wallpaper , the paper won’t adhere to the wall . This tape is available to paperhangers / installers . If you’re interested, shoot me an email wallpaperlady@att.net Another thing about Spoonflower , the seams are meant to be overlapped, by 3/4″ . Note that this does create a ridge that runs vertically the length of each seam. In the grand scheme of things, this isn’t very noticeable. Actually, there are advantages to overlapping seams in this manner. No worries about white substrates showing at the seams, nor the paper shrinking and leaving gaps at the seams. Also, in case of unstable walls that might come apart ( delaminate ) under the tension of the drying / shrinking wallpaper, overlapping disperses the tension and helps prevent wall failure. This pattern is called Serpents and Apples and is by Spoonflower . Spoonflower has a lot of cute designs , and also a good number of fun avant garde patterns like this one. The homeowners have some other non-typical décor that will meld perfectly with this wallpaper. Think life-sized skeletons . … Notice how that light fixture hanging in the center of the wall kinda looks like a skull ? … The home is in the Oak Forest area of northwest Houston .
Vanity wall was originally textured and painted with a semi-gloss . Here it’s been skim-floated , sanded , and primed – ready for wallpaper. Finished. There’s a cool light-up mirror that will hang on the brackets under the light fixture .Opposite corner before.Finished. This room wouldn’t have half the impact without the black moldings and ceiling. The homeowner said she envisioned a jewel box – all tufted and lined with velvet . Well, I’d say she nailed the look! As the dark and mysterious wallpaper moved from left to right, the room began to take on a mood . I love the juxtaposition between a clad wall and a bare wall. Close-up.Detail.The husband is handy, and I really appreciate that he removed the vanity and sink . This made it a lot faster and easier for me, and ensured better adhesion of the wallpaper around the plumbing pipes . And also eliminated stress and creases on the paper that can happen when bending and folding to work it around obstacles. Here is the modern looking vanity that will go into the powder room . To keep white primer from showing at the seams , I striped black paint on the wall under where each seam would fall. Do a Search here to read previous posts about this technique.I use matt finish craft paint from the hobby store , a scrap of sponge , and a bottle cap full of water . Do a Search here to read previous posts about the process and materials . I also run chalk along the edges of the wallpaper, to cover up the white substrate , to ensure there will be no white peeking out at the seams . Again, do a Search on key words to learn more about this technique . Dang it! I forgot to take a picture of the label! But this wallpaper is by York and is called On The Prowl . It’s vinyl on a non-woven backing . The instructions said you could paste the wall for installation . But I pasted the paper, and I think with this product it’s better, because it did seem to want to expand a bit. If you paste the wall and then the paper stretches, you’ll end up with buckles at the seams or bubbles within the strips . The material was fairly flexible , which was nice because it allowed me to “mush” the paper to conform to some pretty un-plumb walls. Although York is one of my favorite brands , I wasn’t real crazy about this particular wallpaper. Still, it seamed up nicely, didn’t shrink, has a vinyl surface that will resist splashes and fingerprints , and is designed to strip off the wall easily and in one piece when it’s time to redecorate . This is a townhome in the Rice Military area of central Houston .
Re my previous post , it’s very common for wallpaper to shrink just a tad when the paste dries, and this can leave you with teeny gaps at the seams. So when hanging a dark paper like this, I like to stripe a band of black paint under where the seams will fall. This way, if the paper does gap at the seams, you will see dark, and not the white wallpaper primer . I measure and plot where each seam will fall and then run a stripe of diluted water-based craft paint (from Michael’s or Texas Art Supply) under where the seam will be. I wet a scrap of sponge and dip it in the paint, adding water as needed. Don’t make it too thick or dark. Because you want the wallpaper adhering to the wallpaper primer underneath all this. On top of the wallpaper primer, the craft paint dries pretty quickly. But I use a heat gun to be sure the paint is good and dry before hanging each strip. Don’t paint more than one or two stripes at a time, because wallpaper stretches and expands when it gets wet with paste , and it’s difficult to predict exactly where each seam will fall. For the same reason, be sure your stripes are at least 1/2″ wide, if not a full inch. Additionally, I’ll take a pastel chalk (NOT an oil pastel – oil stains wallpaper) and run it from the backside along the white edges of the wallpaper, to prevent any white edges from showing at the seams. Do a Search here to see previous posts about that trick .
The Wallpaper Lady's Blog 