Using One Strip to Cover Two Areas Saves Wallpaper

This wallpaper is 20″ wide . My next strip to the left needs to be 20″ wide above the window – but only 1.5″ wide down the side of the window. I hate to use a whole 6′ long strip for this area. Because, as you can see, most of the strip will be where the window is, and will be cut off and thrown away.

But here’s a plan. The same thing is happening on the right side of the wall, on the window to the right. About 10″ of the wallpaper has extended over the window, leaving about 10″ of the lower portion to be cut off and thrown into the trash.
NNo! Since I need a 1.5″ width of a right edge to finish my area on the left side of the wall (see previous photo), I can use this discarded lower 10″ of wallpaper to cover that 1.5″ to the left.

Planning ahead and measuring carefully, I removed the lower section of wallpaper that would have been hanging over the window / shutters . I left plenty of overlap to allow for trimming along the top and along side the window molding. Added bonus – because I’m now not wrestling a 20″ wide strip of paper next to this window and shutters, it keeps a lot of paste from slopping onto the window molding and shutters .
zin this photo, you see the 10″ wide strip I’ve removed. And also the 1.5″ wide strip from the left right edge, that will be put against the strip to the left.

Here’s my 1.5″ wide strip.

And here’s where I’m going to put it. Note that I cut a short strip to fit over the window . It’s 20″ wide – the width of the roll of wallpaper . I cut it long enough to come down the side of the window to where there’s a design element – in this case, a horizontal branch – to disguise the juncture of these two pieces of wallpaper .

About to go into place .

Positioned. Note the overlap of the branch, trimmed along the lines of the motif. This makes the overlap way less noticeable than a straight horizontal patch, or even a splice.
Note: I don’t like to splice / double cut in situations like these – cuts into the wall surface below and can cause the paper to come away from the wall. I don’t mind overlaps in these situations. They’re up high where no one can see, and also much stronger and more stable than a butted edge .

Teimming off excess along the window molding / trim .

Doone!

The tree and leaf pattern is called Twining and is by Graham and Brown . Like most of their materials, it’s a non-woven material and can be installed by pasting the wall – although I usually paste the paper . It is designed to strip off the wall easily and in one piece when it’s time to redecorate . The seams are invisible .

Two Color Rhythmic Print for Heights Breakfast Nook

Before. Grey and boring .
The built-in banquette seating has been removed.

Finished.

Closer look.

Showing the pattern centered on the wall, and with the shutters. The dimensions of the paper not corresponding well with the width of the window, along with logistics of pattern placement at the ceiling line but starting my first strip under the window all created some plotting and engineering challenges. Fun, but time consuming. But it turned out great!

The original idea was to just paper the nook area, ending at the vertical door molding. But it would have looked odd to stop the wallpaper above this doorway. So the homeowner and I decided to run the paper along the top of the doorway, and then down the left side (not shown), which dead-ends into some cabinets and the granite countertop. It looked good and was the right call.

It tickles me that this is quite obviously a riff on the very popular Strawberry Thief wallpaper pattern by William Morris , which is quite popular right now (do a Search here to see my installations of it). When a company comes up with a hit, you can be assured that a competitor will soon be making its own version of it.
The original has a lot more color, but this version is limited to just two colors. Even though there is a lot of contrast between the black and the white , the pattern doesn’t feel busy, because the design is so close and tight .
There is a lot of symmetry , repetitiveness , and balance in Wm Morris and similar styles .

I love the raised ink texture to this material .

Whoops! A slight pattern mis-match . The overall design is busy enough that small imperfections like this (as well as some color variations / shading ) are not really noticeable .

It’s odd to me that the printing defects are different in different strips / rolls of the wallpaper . You’d think that if the print roller was out of whack, it would create the same image every time it strikes the wallpaper surface. Or maybe it’s the trimmers that are off. If they had cut 1/16″ more off that left edge, we might have a perfect pattern match .

The manufacturer is York , one of my favorites , in their Sure Strip line, also one of my favorites.
It’s in the Magnolia Home collection , by, yes, Joanna Gaines , of HGTV fame with the show Fixer Upper .
SureStrip is a pre-pasted , thin , flexible , non-woven material that is easy to hang . It’s also easy to remove when you’re ready to redecorate , because it’s designed to strip off the wall easily and in one piece with no damage to your walls .
installer houston birds