Posts Tagged ‘sinks’

Peel & Stick = Piece of Sh!t

September 24, 2019


We’re seeing more and more of this peel-and-stick, supposedly “removable” and “repositionable” plastic wallcovering. Unfortunately, many homeowners read the lofty claims by the manufacturers and think it will be a perfect alternative to traditional wallpaper. It is not.

The stuff is awful – I won’t hang it, and most of my friends won’t either.

First of all, you don’t NEED an alternative to traditional wallpaper – you just need quality paper and someone who will properly prep the walls and then properly install the paper.

Getting back to P&S, the stuff is virtually impossible to hang. Imagine a 9’x2′ strip of Contact Paper, trying to position that on a wall without it wrinkling or sticking to itself, and then trying to butt another strip up next to it. Not gonna happen. It also does not “remove easily” … well, it does, but it will tear your wall apart in the process.

These homeowners had some guys doing other work in the nursery, and they said they could hang the wallpaper, too. They weren’t experienced paperhangers, and they weren’t up to the battle against this P&S. Virtually no one is.

First, they should have smoothed out the textured wall. Second, most P&S products spec that the wall should be sealed with a semi-gloss paint, which needs to dry and cure for two weeks. As you can see, this adds time and labor charges to the job.

I’m not sure why there are gaps at the seams (top two photos), but better prep would surely have helped prevent this. The large wrinkles are due to the inflexiblity of the material and its unwillingness to twist or stretch into position. With the baby on the way, the homeowner dad got desperate and used nails to try to tack down the curling paper.

The baby girl arrived, the parents lived with this wall for a while, and, when life settled down, they contacted me. I counseled them to forget the P&S and to choose a traditional wallpaper.

They zoomed in on this butterfly pattern by SuperFresco. This material is one of the newish non-woven materials, which contain a component of fiberglass and thus don’t expand or shrink, and won’t tug at the wall, so fewer worries of seems popping loose. These qualities also make it possible to dry-hang the paper, by pasting the wall instead of pasting the paper. I usually paste the paper, but on a single accent wall such as this (no toilets or sinks or fancy moldings to work around), pasting the wall works beautifully. It also saved me lugging my heavy, bulky work table up to this townhome’s third floor. 🙂

Removing the P&S paper was easy – it is strong and held together while I tugged it off the wall … I could do it all from the floor, without even climbing the ladder. Unfortunately, it took much of the paint along with it. So much for the “removable” claim.

It was still as sticky as the day it was born – so I rolled it all up and stuck it to itself and tossed the whole mess into the trash. Done and gone!

I skim-floated the wall to smooth it, sanded smooth, vacuumed, wiped residual dust off the wall with a damp sponge, and then rolled on Gardz, a penetrating primer-sealer, that also is a great undercoat for wallpaper.

All that (especially waiting for the smoothing compound to dry) took several hours. I think it was about 6:00 before I started hanging wallpaper!

Thin non-wovens generally go up with pleasingly invisible seams, and this one did, too. I was surprised to discover more than a few large wrinkles and bubbles. This could have been because the paper got twisted during installation, because the wall was smooth but not flat, because of some uneven reaction between the substrate and the paste which caused off-gassing (burps!), or some other reason. But it meant that I had to go over the wall several times, checking to be sure all areas were firmly secured to the wall.

The finished accent wall looks great! It’s a gentler pattern and a quieter color, and doesn’t hit you in the face as the original floral pattern did. There’s a little bit of fun shimmer in the scattered pearlized butterflies, and the blue-grey wings coordinate nicely with the three grey walls in the rest of the room.

Finally, Baby Girl is ready to move into her own room!

City Scape Zig Zag Lines

April 26, 2019


I love this headboard. The homeowner and his father-in-law made this from scratch, and they made the bed frame, too. I think it’s supposed to look like rough ship-lapped wood … but to me, it looks like the skyline of a major city.

Realizing that the dark navy paint on the accent wall behind the headboard was flat and boring, the couple went to Dorota (read below) and found this fun and lively wallpaper pattern. It echoes the shape of the headboard, while adding a modern, urban edge to the room. And I think it looks like a city skyline!

Note that this pattern very much resembles one by York, in the Candice Olson line, which I have hung a number of times. I guess there is nothing wrong with a company riding the tide of trends, and making a knock-off of a proven design winner.

This is in a master bedroom in a newish townhome in the Cottage Grove neighborhood of Houston. My photo of the label didn’t turn out (Note to self: Always check your phone’s photo log before leaving work for the day.), but I can tell you that the manufacturer is Designer Wallpapers.

The material is a crisp, stiff, medium-weight non-woven material. This stuff has a fiberglass content, so it does not expand when it becomes wet with paste, and it also is designed to strip off the wall easily and in one piece when it’s time to redecorate.

This material would have been more flexible if I had pasted the paper. But since this was one solitary accent wall, with no corners or toilets or sinks or windows to cut around, and since I didn’t feel like lugging my 7′ long and 30lbs table up the three flights of stairs to the master bedroom, I chose to paste the wall.

Because it was a dark paper adhered to a white backing, I used artist’s chalk to color the edges of the strips, so that the white backing would not peek out from the seams.

After cutting the non-woven strips, I roll them up backwards, with the colored surface rolled up inside, and the top coming off the roll first, and then secure it by wrapping an elastic hairband around it. This way, after paste is spread on the wall, when I climb up the ladder with the paper and unroll it, the printed surface will not come in contact with the paste on the wall.

Pasting the wall is a clean way to work, because no paste gets on the woodwork or ceiling, so there is nothing to wipe off. And the excess paper that is trimmed off at the ceiling and baseboard has no paste on it, so it’s clean and won’t stain anything it might fall onto.

The paper went up nicely, and the seams were positively invisible. Oddly enough, because the paper was supposed to not stretch or expand, I did have a little trouble with the pattern match dropping – the pattern matched at the top of the wall, but as you followed it down the 9′ high wall, the pattern began to rise. In order to accommodate this, I had to lower the pattern and allow a slight mis-match at the top of the wall, which permitted me to have a perfect pattern match at eye-level.

Also odd, since the paper was supposed to not expand, even though I hung my first strip against a plumb line (laser level beam), as it moved down the height of the wall, the pattern started to track to the right. As subsequent strips were hung, the paper became more and more off-plumb, until I reached the far left corner, and it was out of whack by more than half an inch from ceiling to floor.

If this had been some wild floral pattern, it would not have mattered. But with a rigid geometric pattern, and especially a vertical one like this, and on a dark background, even with a mere 1/8″ discrepancy, you’re going to notice when things get crooked.

Since the paper is not malleable, I was not able to stretch it into plumb. But I was able to pull a few tricks out of my hat to make it look like the paper was perfectly parallel to that left wall. I didn’t take photos, so no sense in my trying to explain it here. 😦

This wallpaper pattern is by Designer Wallcoverings, and was bought from my favorite source for good quality, product knowledge, expert service, and competitive price – Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. She is great at helping you find just the perfect paper! Discuss your project and make an appointment before heading over to see her.