Posts Tagged ‘split’

RePaste and Disguise Split Wallpaper Seams

October 10, 2020


Several seams in this bathroom, as well as some whole sections of wallpaper, had come away from the wall.

Most likely, this was due to a combination of things … Number 1, extreme humidity from teenaged son taking showers with no ventilation and over several years. Number 2, possible improper wall prep before the wallpaper went up. Number 3, Unstable surface, which allowed layers inside the wall to delaminate and separate from each other.

Whatever the culprit, I had success in using wallpaper paste to re-adhere most of the loose areas back to the wall. We were still left with visible gaps at some of the seams, where the wallpaper had shrunk.

I used water-based craft paint to color these areas. I didn’t use the brushes … I just daubed my finger in the undiluted darker tan paint and swiped it over the gaps, pushing to be sure it reached to the wall. Then I wiped excess off the surface of the surrounding wallpaper with a damp rag.

I used water to dilute some of the blue and red paint, and then added that over the appropriate colored areas. I used the tiny brush to dot on bits of near-black paint, to correspond with the black printed areas on the wallpaper map.

From a distance, you could not see the touch-ups. Even better – you could not see the touch-ups even if very close.

Wonky Walls = Mis-Matched Corners

April 29, 2018


When wallpaper turns an inside corner, you split the strip vertically and place the first half of the strip so that just a teeny tad wraps around the corner, and then you overlap the remaining strip into the corner, using a level to plumb this strip. This keeps all your subsequent strips nice and plumb, and running straight at the ceiling and floor lines (assuming that these lines are truly level).

But when walls and corners aren’t plumb, wallpaper patterns will get distorted. The rule of thumb is to match the pattern at eye level, and then let it fall as it will above and below that point.

This pattern is busy enough that the mis-match is not all that noticeable.