“Sweet Pea” Wallpaper for Sweet Baby Girl

Nursery window / crib accent wall before, primed and ready for wallpaper .

Done. Pattern is nicely centered on the wall .

The pattern is called Sweet Pea .

Has the look of hand-painted watercolor .

Made by Serena & Lily .

I usually love their papers, and I usually love non-woven / paste the wall materials . But not this stuff. For starters, it’s practically transparent . This means you can’t make marks on the wall – like my measurements or strip placement . Also any color irregularities on the wall will show through. A pigmented wallpaper primer is a must .

Here you can see the flower from underneath showing through the paper on top.
In addition, the paper was VERY stiff and difficult to work with. Creased easily fitting it into the areas around the window molding and where the paper met up with the corner. I had these same issues the last time I hung a S&L non-woven (most of their wallcoverings are paper). There are so many good quality N-W substrates out there, makes you wonder why they don’t switch to something better.

The label said this was a drop match . But the pattern match turned out to be a multiple drop .
On a straight match , you’ll find the same tulip, for example, at the top of the wall on every strip. On a drop match , that tulip will be at the top of the first strip, then on the second strip it will drop down half the length of the pattern repeat . On the third strip, it will be back at the top of the wall . On the fourth strip, it will drop down again. And so on.
But on a multiple drop pattern match , also called a quarter drop , that tulip drops down bit by bit over a span of four strips , before it appears again at the top of the wall. Actually, with some multiple drops, the motif can traverse more strips before it’s back at the top.
These patterns are extremely tricky to figure out , and to calculate rollage for. I’m really glad that I rolled the paper out on the floor of this empty nursery , before cutting anything. If you assume that what you have in your hands is a typical pattern match and go and cut all your strips ahead of time, you will have a whole bunch of strips that won’t match up, and will have ruined all that paper.
The home is in the Garden Oaks neighborhood of Houston . installer

Let’s Blame It On The Paperhanger

Obviously, this manufacturer has had complaints about their product. So they’ve come up with a CYA paragraph(s) designed to throw blame onto the wallpaper installer.
Only thing is, most all of the above points they are trying to dodge ARE the fault / responsibility of the manufacturer – NOT the paperhanger .
Gaps: poorly trimmed paper at the factory, possibly due to dull or wobbly trim rollers .
Raised edges: poorly trimmed edges, or incompatible inks and substrates.
Blisters: Usually due to off-gassing due to surfaces that don’t breathe and therefor trap moisture. Or to inks and substrates that are incompatible. … The substrate absorbs moisture from the paste and stretches , but the inks do not, resulting in wrinkles , warps , waffling , and / or quilting .
But, hey – instead of doing some research and product development to improve our wallpaper , let’s just blame it on the paperhanger .

William Morris-Like Design in Woodlands Powder Room

Before. Hurricane Ida (October 2021) took their New Orleans home and everything in it, so the homeowner relocated to a north Houston suburb to be closer to family and college friends. The home is brand new, and has grey-tan walls. While the homeowner “grows” into the house, acquires furnishings, and figures out her decorating approach, she wanted at least one room prettied up.

She fell in love with this wallpaper pattern, and decided the powder room was the best place to showcase it.

Pattern centered on the sink / faucet and light fixture. It will look symmetrical and super nice when the mirror is hung.

William Morris innovated designs like this back in the 1860’s, and started the Art Nouveau and Arts & Craft movements, which carried on into the early 1900’s. I’ve hung a lot of patterns by him, and similar, in recent years, indicating an increased interest in this gorgeous, fluid, nature -centric style.

The paper has a velvety feel, and the seams were invisible. It’s non-woven material, which is very strong and designed to strip off the wall easily and in one piece when you redecorate. It’s fairly water-resistant and somewhat more stain-resistant than more traditional wallpaper substrates.

Apelviken by Midbec is a Scandinavian manufacturer. Yeah…. the instructions on the flip side were a lot of fun to read through!

Interestingly, the labels listed the sequence in which the bolts were printed. Note that not all the bolts were in proper sequence. With a machine-printed product, sequence isn’t all that important because the color will print out very evenly.

The homeowner loved the new look, and said that having this one room decorated with some color and personality helped a lot to make the new house feel like a home. After the trauma she went through in recent months, it was an honor to help her new home become warm and welcoming.