Posts Tagged ‘sunburst’

Replacing One Wall

April 13, 2019

I hung this sunburst medallion wallpaper in an entry in west Meyerland a year or two ago. Originally, there was a doorway in the middle of this wall that led into the adjoining room. The homeowners had the doorway closed off, and the opening was replaced with a new piece of Sheetrock. This needed to be covered with wallpaper.

New wallpaper could not be patched in, and the damaged areas along the wainscoting could not be readhered, so new paper had to be bought to cover the entire wall – as well as a section over the entry door.

The second and third photos show where the contractor had pulled the paper away from the wall. As you can see, it took some of the primer and the paint below it, too. I wish I knew what the contractor did to have this result, because when I stripped off the rest of the wallpaper, it came off easily and left the wall surface below it perfectly intact.

I suspect that he just yanked the paper, or possibly used heat or some weird chemical. The proper way to strip off wallpaper is to wet it, then separate the top, inked layer from the bottom, substrate layer, and pull the top layer gently off the wall. Then you take a sponge and bucket of water and wet the backing. Once that water reactivates the paste, the paper backing will come away from the wall easily and with little-to-no damage to the wall.

I also suspect that this paper was hung over KILZ Original oil-based primer, which was a superb primer because it stuck tight and because it was not affected or reactivated by the water used to soak the wallpaper backing. Unfortunately, the formula for that product changed due to EPA regulations, and wallpaper paste will no longer stick to it. These days, I’m using two alternative primers – both water-based, and I am curious to see how they hold up when wallpaper is stripped off them.

Back to today’s job … Once I got the paper off, I used joint compound (“mud”) to smooth over the uneven areas between the contractor’s stripping job and mine, then sanded smooth, wiped free of dust, primed, and then hung the new paper.

The wallpaper pattern is by Thibaut, and is called Bahia. It’s a non-woven product, and is designed to strip off the wall easily and in one piece when it’s time to redecorate. As you can see, neither the contractor nor I had success with that. The tried and true separate-the-layers-and-saturate-the-backing-with-water method was the solution.

Advertisements

Sunny Starburst Entry

July 19, 2017

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image


The walls in this 60’s era Meyerland-era entry may have been white, but they did nothing to lighten the small room. The homeowner’s vision of a gold-on-white sunburst medallion motif brightened things immediately. The feel is crisp and playful.

The homeowners plan to change the light fixture in the room, and I am trying to convince them to go with a gold one that is spherical and spoke-like, and resembles the sunburst design.

This wallpaper pattern is by Thibaut Designs, printed on a non-woven substrate, and was intended to be a paste-the-wall installation. However, the paper behaved better and the seams looked better when I pasted the back of the paper, instead of the wall.

was bought at below retail price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. She is great at helping you find just the perfect paper! Discuss your project and make an appointment before heading over to see her.