Modern Electrical Technology Makes Hanging Paper Easier

Bad photo, but I’m to put wallpaper in this room, including the tall and deep fir-down at the top right, which has two recessed light fixtures in it. You want the paper to go behind the light fixtures, not cut around them, if at all possible. In the photo, at the far middle left, you can see one fixture dangling by it’s wires below the fir-down.

Some of these recessed fixtures are tricky to take down (many won’t come down at all), but these ones turned out to be held in place by tension springs, which fit into sideways hooks, which you can see at the left inside the hole.

Here’s a closer look. These are the same type springs that hold the vent covers to exhaust fans in place. As you push them upward, they spread apart and hold the fixture securely in place. Easy-peasy! You can also squeeze the springs together and remove them from the mounting housing, which lets the fixture dangle from its electrical wires.

That’s what I’ve done here. Now it’s much easier to work the wallpaper around the fixture. But it could be made even easier – by removing the light fixture all together.

Most light fixtures have black and white wires coming from inside the wall that connect to black and white wires on the electrical fixture and are connected and held in place by a twist-on screw cap or wire nut. What’s very cool about this particular fixture’s electrical connections is that it’s made by this orange plug, which fits into the orange receptacle – no wires to twist or cap, and no need to cut off the power. It’s all simple and perfectly safe.
Here I’ve disconnected the two orange parts.

With the light fixture completely out of the way, it’s much easier to install the wallpaper, and no paste gets slopped onto the fixture.

Here’s the wallpaper installed and trimmed around the inside of the opening.
Oh, and don’t mind the slight pattern mis-match on the left … there were issues with un-plumb and un-level walls coming into play.

And here I’ve reconnected the orange plug parts, and placed the spring back inside those hooks, then pushed the light fixture up and back into place. Look at how nicely the flange (outer ring) of the fixture covers the cut edge of the hole and the wallpaper.

Culprit: Technology Solution: Doggie Door and Widdle Kid

Client wasn’t home when I arrived, so gave me the code to the backdoor lock. Only thing is, the code didn’t work. Neither did the back-up code. Turns out the battery in the lock chose this day to die.
The homeowner had to dash to the house. Only she couldn’t get in, either. This kid of lock doesn’t take a physical key.

Never fear – youngest child to the rescue! “He loves to squeeze through the doggie door,” said the father.
Problem solved! I got in, and got right to work!