Tucking Wallpaper Behind Pedestal Sink

Pedestal sinks (and toilets ) are tricky to hang wallpaper around and behind .  Over-working or manipulating the paper to fit and then trim around curves like this can cause tears , creases , or burnishing , among other issues .  Also, if there’s a cut edge along the top of the sink / vanity , if water splashes , it can be wicked up by that cut edge , sucked up into the wallpaper, which can cause curling at the seams and / or delaminating of the paper .  So , instead of being trimmed / cut along the top, best if the wallpaper can go behind the sink / backsplash.

Here’s the 1/4″ or so gap that I’m going to work the wallpaper into.

 Rather than trying to wrestle a 9′ strip of 27″ wide wallpaper down the wall and around this sink , it made sense to cut the strip horizontally at a point just below the top of the sink . I’ll piece the bottom section in shortly.

Sometimes, pedestal sinks are adhered to the wall with caulk , and cannot be moved.  But today I got lucky.  I was able to go under the sink and loosen the bolts , one on either side, ( see photo ) holding it to the wall .  This is not easy – you’ve got to have small hands , good eyes , good light ,  a plumber’s wrench , a box wrench , or a pliers – whatever works!  And not undo too much, because you don’t want to dislodge the  system ( toggle bolt ) that’s holding the bolt in place.
After all that, loosening this bolt gave me about a whole ¼”  area of play .   Still, I was able to carefully and slowly work the wallpaper behind and around the sink , without significant creasing or damage .  See second photo .

The pattern is called Cornflower and is by Rifle Paper , a brand by York , one of my favorite manufacturers. Rifle Paper is usually a user-friendly non-woven material , also called paste-the-wall …. although can sometimes surprise you with traditional paper wallpaper instead of N-W .