A nice faux grasscloth made of textured vinyl in an en-suite bathroom in a new home in West U ( Houston ). This is the same wallpaper , but a different color , that I hung yesterday in the bedroom across the hall. A large mirror will be hung between the two light sconces. It’s a tan with silver metallic color , that goes nicely with both the vanity countertop and the bright chrome faucet and towel ring , as well as the mirror .With the light switch for perspective, here you can see the realistic embossed texture . I understand that the manufacturers use photographs of real grasscloth , and transfer to their vinyl or paper products . This gives you a realistic look, but with better color consistency , as well as a pattern that will match across the seams, reducing the jarring look of paneling and shading that often comes with real grasscloth. Do a search here to read previous posts about this. Made by York , and purchased from Dorota , at the Sherwin-Williams on University in the Rice Village . Call before heading over to get her expert help in finding your perfect paper! (713) 529-6515 installer
This young family wanted some WOW! Factor for their new home’s plain-Jane powder room. It’s a 2-room set up, with the sink in one area and the toity around the corner in a more private area.Looking through one room into the next – yes, really a WOW! Factor!Looks fantastic with the burnished gold faucets, light sconces, and hand towel ring.Opposite wall. I centered the pattern on the wall opposite the mirror, so that the design would work around the room evenly and the pattern would fall equally on these two walls. In other words, the pattern hits the tile wall on the left at exactly the same point as it does on the tile wall to the right. The sconces also land on the same element in the wallpaper. This gives a very symmetrical look as you face the mirror. One of those things no one can put his finger on, but it makes the whole room feel balanced and in sync. Back wall connecting to right wall with door that leads to the entry hall.The commode room is under the stairway, so has a strongly sloped ceiling – and tight working quarters. You can also see that the wall is bowed in the corner, resulting in a good pattern match at top and bottom, but some mis-alignment in the center. Pretty typical. No walls are perfectly plumb, no ceiling is perfectly level, and corners are just about always a bit wonky. Geometric designs like this are particularly difficult to make look perfect. On close-up, you can see a slight raised ink texture. This surface printed wallpaper was not a crisp look – nothing wrong with that … it’s part of the hand-crafted look. The non-woven material is thick and stiff, and the seams were a bit more noticeable than on many other non-wovens. I also noted that where the gold ink hit the edges of the paper, there were ever-so-slight curls and overlaps. My guess is the gold ink reacted to the wet paste and expanded differently from the black and the background color. Never mind. From two feet away, you can’t notice it at all. The David Hicks Collection by GP & J Baker contains several variations of this type of bold geometric pattern. Some of the vendors are calling this a “new” release … but I first hung one of these designs maybe 10 years ago. Unfortunately, they haven’t gotten any better with the quality. Surprising, because GP&J Baker’s papers are usually very nice – I did one just a few months ago and loved it. Conversely, this one is quite stiff, and trying to work it into tight spots such as corners or behind a toilet or around a vanity or light fixture can result in creases. And the ink flakes off very easily. Here, just pressing the wallpaper against the baseboard so it could be trimmed caused the ink to chip off, and you can see little bits of it collected on top of the baseboard on the left. Luckily, this was at the floor and not very noticeable. I used some black chalk to cover the white areas. But at eye-level, this would have necessitated removing the whole strip and replacing with a new one.
The circle on the right is where I removed the towel ring. On the left is where I removed the switchplate cover. You can see that the stringcloth that was exposed to light has faded a bit over the years it has been in this powder room.
Another interesting thing is the amount of dust that has collected inside the switchplate cover. This is because of air suction inside the wall – probably due to a leak in the ductwork somewhere.