Re previous post … This accent wall is in the butler’s pantry , and ends at the corner that turns into the main kitchen area. Since this corner was visible from the great room / family room , I plotted the lay-out so the full motif would fall at that corner . In other words, I butted the right edge of the wallpaper up against the corner of that wall . This left a vertical gold line running the height of the wall. A good stopping point for the eye. Just perfect! But … the paper came with a teeny bit of black next to that gold line. So there was about 1/16″ of black showing to the right of that vertical gold line. (Sorry, no pic) I thought it was so minor that it wouldn’t be a big deal. But, once that strip got up on the wall, I thought that black edge caught your eye . It bugged the heck out of me! So I took straightedge and razor blade and trimmed off that miniscule bit of black. No we have a crisp gold line against the corner.As the wallpaper hung from right to left, at the final corner, naturally, the pattern didn’t fall exactly along one of the vertical gold lines. For one thing, walls are always wonky . Also, that last section of black trapezoids were less than their full width. But only by about a half an inch. I had measured ahead of time and knew this, and I felt 1/2″ shorter box wouldn’t bother anybody. But I did think I could make that left edge look crisper , and also wanted it to match the edge on the right side of the wall. So I took a bit of scrap wallpaper (like what you see lying on the floor on the left), and again my straightedge and razor blade, and trimmed off one of those gold lines. This is about 1/8″ wide . Next, I pasted it over that left edge, as seen in the photo. Here is the left edge finished. Nice and sharp , and more ” finished ” than just a black box ending at the wall. Speaking of black blocks … those on the far left are a bit narrower than the ones on the rest of the strips. But, seriously – who cares, and who notices?? What you do notice is the gold strip neatly trimming off the wall corner . This geometric pattern is in the Jaclyn Smith line by Trend Fabrics . It’s a nice non-woven , paste the wall material , and is durable and stain-resistant . Also, it will strip off the wall easily and with little / no damage to the wall when it’s time to redecorate . The install was in a home in the Woodland Heights neighborhood of Houston .
” Floating ” accent wall between kitchen and dining room . The homeowners originally considered a mural for this area . But with help from the wallpaper sales guy, they landed on this. Both husband and wife love this. The black color plays beautifully off the black cabinets in the kitchen , butler’s pantry , and mud room . The gold geometric lines keep everything lively . The specs say this is is a 25″ pattern repeat. But from looking at it, you’d think it was much shorter … the narrow lines match up with the narrow lines, and the fat sections line up with fat sections. Maybe 4″ repeat. But – not. I’ve hung this before, so I was already aware that those lines and sections are not all the same distance apart. It’s essential that you lay your strips next to each other and make sure you’ve got the pattern match correct. Because if not, you could end up with tiny 1/8″ mis-matches across the seams between some of those gold lines . This is a Jaclyn Smith design by Trend . It’s a paste-the-wall / non-woven material , and is strong and durable , and resistant to stains and tears . Flexible and easy to install . Will strip off the wall easily and in one piece when you redecorate . It has a raised ink / lightly textured surface . The wallpaper was purchased from Calico / Calico Corners on W. Alabama in Houston , with the expert knowledge and interior design assistance of Ron Dillon , whom I’ve known for about 25 years . The home is in the Woodland Heights neighborhood of Houston.
Vanity area before. Note the nice homeowner had the plumber remove the wall-mounted faucet and handle. This made the wallpaper installation so much easier – and eliminated a zillion relief cuts around these objects that might later give entry for splashed water to wick under and loosen the wallpaper. Done. I centered the pattern on the wall so it hits both corners equally, and it falls perfectly around the faucet (no photo). The light fixture was hung a tad off-center. Burnished gold accents of the light fixture, faucet (to be installed later), and toilet paper holder, as well as a gold-painted ceiling, compliment the gold lines in the pattern, and really pull this room together. This non-woven paste-the-wall material is made by Trend, and is in the Jaclyn Smith collection. It has a slightly textured surface, and appears to be vinyl on the surface. This makes is more durable and stain-resistant than most paper wallpapers. It is thin and flexible, and I liked it a lot. The home is a contemporary new-build in the Lindale Park neighborhood of central Houston.
Some bolts / rolls of this Jaclyn Smith by Trend wallpaper came with a 1/8″ bit of pattern on the right edge. But other bolts had differing amounts. This one had barely anything. So what’s the problem? Butting one strip up against another on the wall might result in a slight pattern mis-match. The spacing between the vertical stripes might be off, which could catch the eye. But also the gold diagonal stripes might not match up – and that would most definitely be visible.
Headboard accent wall before. Textured wall was skim-floated and sanded smooth, then primed. Now it’s ready for wallpaper.Finished.Closer look.Detail. The seams were invisible. The lines on this paper are raised a bit, so there is a 3-D effect. I hung this non-woven wallpaper by the paste-the-wall method. Here I have rolled the strips backward, to prevent the decorative surface from hitting the paste on the wall. When I’m at the top of my ladder, I will take off the elastic hairband and let the paper unfurl down to the floor. It’s rolled so the top of the strip comes off first. I have measured the wall and noted where the center point is, then determined where I want my first strip to fall. The black box in the foreground is my laser level, and you can see the vertical red line it’s shooting at the wall, which is where I am going to line up my first strip. Positioning the wallpaper strip along the vertical laser line. This muted geometric pattern is in the Jaclyn Smith Home line by the Trend division of Fabricut. It was mighty nice to work with, and will hold up for years until the family is ready for a change of decor. Then, the polyester-content non-woven material is designed to strip off the wall easily and in one piece.
The home is in the Memorial Villages neighborhood of Houston.
Here is an example of a current trend in wallpaper designs – a traditional motif like this damask, but blown up to be very large, and in unexpected colors. This taupe-on-taupe goes amazingly well with the builder’s choice of color on the woodwork. A damask is a traditional design, but in this over scale size, it has a bit of sass, and works nicely with the room’s “modern rustic industrial” features, like the rolling wooden barn door.
The room was meant to be a home office, but this young family is using it for “Grandma’s room.” Grandma visits weekly, and the homeowner wanted her room to be inviting and spa-like. Accent colors will be a murky turquoise, with bits of lighter turquoise, which are superb spa colors.
The paper was bought from Walls Republic, and is a non-woven material and was installed with the paste-the-wall method. The house is in the far eastern edge of the Houston Heights.
The Wallpaper Lady's Blog 