Posts Tagged ‘vertical lines’

Faking Perfection

July 20, 2019


Even though I carefully centered this trellis pattern on the dining room wall, due to the pattern being a teensy bit off-center on the strip, by the time it reached the right and left corners, the pattern was a tad off. Meaning that the dark vertical elements in this trellis design were about 3/8″ wide on the left side of the wall. But on the right side, the mirror-image elements were no more than 1/8″ wide, and tapered off to nothing at the top of the wall, due to a bow in the wall.

In the top photo, if you look at the bottom right corner, next to my ladder, you can see the difference in width of the vertical lines compared to those at the top of the wall, and at the left side of the room.

If the design had hit the corners in the curved parts of the trellis, no one would have noticed any slight difference in width. But since the pattern landed on a vertical motif that the eye expected to be 3/8″ wide, the right wall with it’s narrower or non-existent vertical motif was kinda noticeable. At least to me.

So I used my straightedge and a razor blade to cut some 3/8″ wide vertical strips. I then pasted these onto the appropriate place in the design. This made the Moroccan “lanterns” look a little narrower than they were supposed to be. But that is not nearly as noticeable as maintaining the width of those vertical strips at the left edge of the wall. See last photo.

I have done this with paper many times. But I was a little nervous trying this trick with a 3-D stringcloth material, because I feared the thickness of the overlay would be eye-catching. I also worried that the adhesive would not adhere to the strings.

But everything worked out nicely. The appliqu├ęs stuck without argument, and you really couldn’t notice the thickness of those tiny patches.

All this tweaking took about an extra 45 minutes. I think it was well worth it.