Posts Tagged ‘wall visible at the seams’

Paint Stripes to Prevent White Wall Peeking Out

January 8, 2022
Sometimes (usually) wallpaper expands when it gets wet with paste and then shrinks just a tad when it dries. This can result in hair-breadth gaps at the seams. Usually not a big deal. But when the paper is dark and the sub-surface is light, you can end up with white wall visible at the seams.
So sometimes I’ll paint a stripe of matching color behind where the seams will lie. Measure to plot where the seam will fall, then use a level and pencil, or a laser level, to indicate where, and then run a stripe of paint along that line. Make the stripe wide enough to accommodate slight variations in measurements and wallpaper expansion.
I use craft paint from the hobby store or Texas Art Supply. The photo shows an outdoor paint – not the best option, but it’s what I had in the truck. 🙂 I use a small rectangle of sponge dipped in water and then in the paint.
For extra assurance, on thick papers, dark surface printed on a white backing, you can also use artist’s chalk pastels (chalk only and NOT oil pastels) to color the edges of the seams. Do a Search here (upper right corner) to find previous posts about that.