Posts Tagged ‘water stained’

Grasscloth Repair

March 18, 2018


These homeowners in the Rice Village area of Houston suffered a window leak during Hurricane Harvey. Water stained the seam between two strips of grasscloth. Both strips had to be removed and replaced.

The strip to the left worked it’s way around the window and over the top. To replace this entire strip would have used an 8′ length of paper, and required removing the window valance. I wanted to use shorter scraps left from the original install, and also sure didn’t want to mess with taking down the curtains.

The grass portion pulled off easily, leaving the paper backing on the wall. I used a sponge and bucket of water to wet this backing, which reactivated the paste, and the backing came off easily, with no damage to the wall. (2nd photo)

I cut the grasscloth horizontally just to the left of the window sill. That way, I only had to replace the bottom portion. I pulled off a few of the strands of grass, leaving the black paper backing on the wall. (3rd photo)

Then I cut a new strip and placed it on the wall, and trimmed along the top of one strand of grass, so that it laid over the black paper backing on the wall, and met up with the other grass strands on the upper portion of the wall. (4th photo)

Except for a teeny extra thickness due to the black paper underneath, the join is invisible. (5th photo) At the factory, the grass fibers are held to the backing by sewing them in place with thread. There are a few loose threads where the material was cut, but that’s just going to happen, and it’s barely noticeable.